Phoenix MACX MCR-EX-TC-I-temperature measurement transmitter 1050233, intrinsically safe temperature measurement transmitter, can convert thermocouple signals and mV sources installed in explosion-proof areas into 0/4... 20 mA signals and transmit them to safe areas Load. Freely programmable. 3-way isolation, screw connection, SIL.
| Product Type | temperature measurement transmitter |
| product series | MACX Analog |
| Application | temperature |
| Channels | 1 |
| Model | Ex I Isolation Amplifier with SIL Functional Safety |
| configuration | Software |
| Function | |
| configuration | Software |
| electrical isolation | 3 End Isolation |
| galvanic isolation between input and output | No |
| Cold spot error, max | ± 2 K |
| step response (0-99%) | ≤ 1.7 s |
| temperature coefficient, typical | 0.01 %/K |
| Typical transmission error | 0.1 % (see data sheet for full transmission error recognition) |
| electrical isolation | |
| Test Voltage | 2.5 kV AC (50 Hz, 60 s) |
| Overvoltage Category | II |
| pollution level | 2 |
| Electrically isolated input/output/power supply IEC/EN 61010-1 | |
| Standards/Regulations | IEC/EN 61010-1 |
| Rated insulation voltage | 300Vrms |
| insulation | security isolation |
| electrical isolation input/output IEC/EN 60079-11 | |
| Standards/Regulations | IEC/EN 60079-11 |
| Rated insulation voltage | 375VPP |
| galvanically isolated input/power supply IEC/EN 60079-11 | |
| Standards/Regulations | IEC/EN 60079-11 |
| Rated insulation voltage | 375VPP |
| power supply | |
| Rated supply voltage | 24V DC -20 % ... +25% |
| Supply Voltage Range | 19.2V DC ... 30V DC |
| Maximum current consumption | < 40 mA (24V DC) |
| power consumption | ≤ 0.76W |
| power consumption | ≤ 1W |
| signal | |
| Input Number | 1 |
| input signal | temperature |
| voltage | |
Phoenix MACX MCR-EX-TC-I-temperature measurement transmitter 1050233
