Phoenix MACX MCR-PTB-power supply and fault information module 2865625, power supply and fault signal module with screw connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector
| Product Type | Power Module |
| Product Series | MACX Analog |
| electrical isolation | |
| Overvoltage Category | II |
| pollution level | 2 |
| galvanically isolated input/switch output | |
| Rated insulation voltage | 50V AC/DC |
| power supply | |
| Rated supply voltage | 24V DC |
| signal | |
| voltage input signal | 19.2V DC ... 30V DC (24V DC,-20 % ... +25 %) |
| Fuse | 5 A (replaceable), slow fuse 250V AC |
| Polarization and Surge Protection | is |
| switching: relay | |
| Contact Type | 1 changeover contact |
| Contact Material | Gold (Au) |
| maximum switching voltage | 50V AC (2 A) |
| 30V DC (2 A) | |
| 50V DC (0.22 A) | |
| signal | |
| Maximum current output signal | 3.75 A |
| output voltage | Input Voltage-Max. 0.8V at 3.75 A |
| Connection Mode | screw connection |
| stripping length | 7mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 14 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Explosion-proof installation (EPL) | Gc |
| Div. 2 |
| Status Display | 1 red LED(error) |
| 2 green LEDs (PWR1 and PWR2) |
Phoenix MACX MCR-PTB-Power Supply and Fault Information Module 2865625
