Phoenix MACX MCR-SL-2NAM-R-UP-SP-isolation amplifier 2924304, dual-channel NAMUR isolation amplifier, wide-band power supply, used for proximity sensors and switches. In terms of signal output, each channel has a relay with an available change-over contact. Line fault detection (LFD),3-way isolation, plug-in connection, SIL 2.

Product Type isolation amplifier
product series MACX Analog
Channels 2
Model Isolation Amplifier with SIL Functional Safety
configuration DIP switch

Function
configuration DIP switch

electrical isolation 3 End Isolation
galvanic isolation between input and output is
rated conditions ≤ 1.3W
step response (10-90%) Typical 6 ms (N/O contact: OFF/ON)
Typical 6 ms (N/O contact: ON/OFF)
Typical 4 ms (N/C contact: ON/OFF)
Typical 10 ms (N/C contact: OFF/ON)
electrical isolation
Test Voltage 2.5 kV AC (50 Hz, 60 s)
electrical isolation input/output IEC/EN 60079-11
Standards/Regulations IEC/EN 60079-11
Rated insulation voltage 375VPP
Overvoltage Category III
pollution level 2
galvanically isolated input/power supply IEC/EN 60079-11
Standards/Regulations IEC/EN 60079-11
Rated insulation voltage 375VPP
Overvoltage Category II
pollution level 2
electrically isolated input/power supply IEC/EN 61010-1
Standards/Regulations IEC/EN 61010-1
Rated insulation voltage 300Vrms
Overvoltage Category II
pollution level 2
insulation security isolation
galvanically isolated output 1/output 2/input, power supply IEC/EN 61010-1
Standards/Regulations IEC/EN 61010-1
Rated insulation voltage 300Vrms
Overvoltage Category III
pollution level 2
insulation security isolation
power supply
Rated supply voltage range 24V AC/DC ... 230V AC/DC -20 % ... +10 % (50/60 Hz)
Supply Voltage Range 19.2V AC/DC ... 253V AC/DC (50/60 Hz)
Maximum current consumption < 80 mA
< 42 mA (24V DC)
power consumption < 1.1W
power consumption < 1.1W
2865793

Phoenix MACX MCR-SL-2NAM-R-UP-SP-Isolation Amplifier 2924304

Product Center

PRODUCT CENTER