Phoenix AXC F IL ADAPT-PLC expansion module 1020304, which can be installed in parallel to the Inline adapter terminal (INTERBUS master station) on the right side of the PLCnext Control equipment to create a PLCnext Inline station
| width | 12.2mm |
| height | 119.8mm |
| depth | 71.5mm |
| Application Description | |
| Application Description | for industrial applications only |
| Inline Local Bus | |
| interfaces | 1 |
| Connection Mode | Inline data span block |
| INTERBUS local bus (master) | |
| interfaces | 1 |
| Connection Mode | Inline data span block |
| transmission principle | copper cable |
| support equipment | AXC F 2152 |
| System Limitations | |
| the number of local bus devices that can be connected | max. 63 (note current loss) |
| the number of devices with parameter channels | maximum of 24 |
| - 0 (INTERBUS remote bus not supported) | |
| Product Type | I/O components |
| product series | PLCnext Control Extension |
| type | Module |
| diagnostic information | INTERBUS bus fault is |
| INTERBUS peripheral failure is |
| rated conditions | 0.77W |
| potential | |
| protection circuit | polarity protection/supply voltage; polarity protection diode |
| Transient protection; Suppressor diode | |
| potential: 24V power supply UILC | |
| supply voltage | 24V DC-15%/+ 20% (conforming to EN 61131-2) |
| current consumption | 20 mA |
| potential: 7.5V communication power UL(potential jumper) | |
| supply voltage | 7.5V DC ±5% |
| potential: 24V analog power supply UANA(potential jumper) | |
| supply voltage | 24V DC -15 % / +20% |
| Supply Voltage Range | 19.2V DC ... 30V DC (includes all tolerances, including ripple) |
| potential: 24V main power supply UM | |
| supply voltage | 24V DC-15%/+ 20% (conforming to EN 61131-2) |
| Supply Voltage Range | 19.2V DC ... 30V DC (includes all tolerances, including ripple) |
Phoenix AXC F IL ADAPT-PLC expansion module 1020304
