Phoenix AXL E IOL AI1 I M12 R-analog module 2700275,Axioline E IO-Link/analog converter, used to connect an analog sensor, 4 mA ... 20 mA,M12 connector, elbow model
| Product Type | Interface Interface Converter |
| product series | Axioline E |
| type | Stand-Alone |
| Axioline E | |
| Model | elbow |
| diagnostic information | Overflow or Underflow Diagnostic Coding Information (IB IL Format) |
| invalid measured value/no valid measured value diagnostic code message (IB IL format) | |
| short-circuit diagnostic coded information (IB IL format) | |
| open, to 0 mA diagnostic coded message (IB IL format) | |
| module error diagnosis coding information (IB IL format) | |
| insulation characteristics | |
| pollution level | 2 |
| Power: IO-Link | |
| I/O power supply | 24V DC (power supply through the IO-Link interface of the IO-Link master station.) |
| current rating for each IO-Link port | Max. 100 mA |
| power consumption | Typical 16.5 mA ± 15% (24V DC) |
| Max. 120 mA | |
| protection circuit | polarity protection |
| short circuit protection | |
| overload protection | |
| simulation: overview | |
| Enter Name | Analog Input |
| Input Quantity | 1 (current) |
| A/D Converter Resolution | 12. |
| Connection Mode | M12 connector, A- code |
| connection system | 3 lines |
| current input signal | 4 mA ... 20 mA |
| input current | Max. 500 Ω |
| data format | IB IL,S7 Compatible |
| filtering | none or main value |
| IO-Link | |
| ports | 1 |
| Connection Mode | M12 connector, A- code |
| connection system | 3 lines |
| Specification | V1.1.1 |
| prevents polarity reversal | is |
| cycle | minimum 2 ms |
| Process Data Volume | 16 bits (input data) |
| 16 bits (output data) | |
| Diagnostic Messages | |
| diagnosis | overflow or underflow |
| Message | diagnostic coding information (IB IL format) |
| Diagnostic Messages | |
| diagnosis | invalid measured value/no valid measured value |
| Message | diagnostic coding information (IB IL format) |
Phoenix AXL E IOL AI1 I M12 R-Analog Module 2700275
