Phoenix AXL E IOL AO1 U M12 R-analog module 2700278,Axioline E IO-Link/analog converter, used to connect an analog actuator, 0V ... 10V,M12 connector, elbow model
| Product Type | Interface Interface Converter |
| Product Series | Axioline E |
| type | Stand-Alone |
| Axioline E | |
| Model | elbow |
| diagnostic information | short-circuit diagnostic coded information (IB IL format) |
| Configuration Invalid Diagnostic Code Message (IB IL Format) | |
| module error diagnosis coding information (IB IL format) | |
| insulation characteristics | |
| pollution level | 2 |
| power supply: IO-Link | |
| I/O power supply | 24V DC (Power is supplied through the IO-Link interface of the IO-Link master station.) |
| current rating for each IO-Link port | Max. 100 mA |
| power consumption | Typical 16.5 mA ± 15% (24V DC) |
| Max. 135 mA | |
| protection circuit | polarity protection |
| short circuit protection | |
| overload protection | |
| IO-Link | |
| ports | 1 |
| Connection Mode | M12 connector, A- code |
| connection system | 3 lines |
| Specification | V1.1.1 |
| prevents polarity reversal | is |
| cycle | minimum 2 ms |
| Process Data Volume | 16 bits (input data) |
| 16 bits (output data) | |
| simulation: | |
| Output Name | analog output |
| Connection Mode | M12 connector, A- code |
| connection system | 3 lines |
| outputs | 1 (voltage) |
| D/A Converter Resolution | 12. |
| data format | IB IL,S7 Compatible |
| voltage output signal | 0V ... 10V |
| load/output load voltage output | 2 kΩ minimum |
| Allowable Cable Length | max. 30 m (shielded cable) |
| Diagnostic Messages | |
| diagnosis | short circuit |
| Message | diagnostic code information (IB IL format) |
Phoenix AXL E IOL AO1 U M12 R-Analog Module 2700278
