Phoenix AXL F DOR4/2 AC/220DC 1F-Relay module 2700608,Axioline F, relay module, relay output: 4 (floating ground),N/O contact, 220V DC,230V AC, local bus transmission rate: 100 Mbps, protection level: IP20, including bus base module and Axioline F connector
width
53.6mm
height
126.1mm
depth
54mm
Notes on dimensional data
using TH 35-7.5 rails (as EN60715).
Application Description
Application Description
for industrial applications only
Axioline F Local Bus
interfaces
2
Connection Mode
bus base module
transmission speed
100 Mbps
Module
Input Address Area
0 Byte
Output Address Area
1 Byte
the required parameter data
1 Byte
the required configuration data
6 Byte
relay
outputs
4 (Floating)
Connection Mode
in-line connection
connection system
2 wire system
Contact Type
N/O contacts
switching current
max. 8 A AC (cos phi = 1)
For DC applications, see the following values for the load limit curve:
Max. 8 A DC (≤ 30V, resistive load)
Max. 500 mA DC (110V, resistive load)
Maximum 250 mA DC (220V DC, resistive load)
Maximum 220 mA DC (125V DC,L/R ≤ 50 ms,UL approved applications)
Maximum 110 mA DC (250V DC,L/R≤ 50 ms,UL approved applications)
On-Off Capacity
maximum 2000 VA
For DC applications, see the following values for the load limit curve:
max. 240W (30V DC)
Max. 55W (≥ 60V DC)
up to 25W (125V DC,250V DC,UL approved applications)
switching capacity according to IEC 60947-5-1
6 A (120V (AC15))
3 A (240V (AC15))
0.22 A (125V (DC13))
0.1 A (250V (DC-13))
Switching frequency
max. 6 (per minute)
mechanical life
10x 106Switch Times
2688051
넳넲
Phoenix AXL F DOR4/2 AC/220DC 1F-Relay Module 2700608
