Phoenix AXL F SGI2 1H-analog module 2702911,Axioline F, strain gauge acquisition module, local bus transmission rate: 100 Mbps, protection level: IP20, including bus base module and Axioline F connector
| width | 35mm |
| height | 126.1mm |
| depth | 54mm |
| Notes on dimensional data | using TH 35-7.5 rails (as EN60715). |
| Application Description | |
| Application Description | for industrial applications only |
| Axioline F Local Bus | |
| interfaces | 2 |
| Connection Mode | Bus Base Module |
| transmission speed | 100 Mbps |
| Module | |
| Hex ID Encoding | None |
| Input Address Area | 12 Byte |
| Output Address Area | 12 Byte |
| the required parameter data | 48 Byte |
| 7 Byte | |
| simulation | |
| Input Description | Stress Measurement Input Module |
| Input Number | 2 |
| connection system | 6 or 4 wire, shielded twisted pair |
| bridge potential difference Ud | Determine the range by selecting the characteristics |
| -35 mV ... 35 mV | |
| bridge voltage U0 | 5V |
| Measurement Value Expression | 32 Bit |
| Features | setting range: 350 μV/V ... 6500 μV/V |
| Pin | |
| Description | Floating N/O contact |
| Quantity | 2 (Ka1-Kb1,Ka2-KB2) |
| contact resistance | <1Ω (typical) |
| <3Ω (max) | |
| Typical Response Time | Typical 0.2 ms (open) |
| Typical 2 ms (off) | |
Phoenix AXL F SGI2 1H-Analog Module 2702911
