Phoenix AXL SE DO16/1-digital quantity module 1088129,Axioline Smart Elements, digital quantity output module, digital output: 16,24V DC,500 mA, connection technology: 1-wire system, protection level: IP20
| width |
14.9mm |
| height |
62.2mm |
| depth |
62mm |
| Application Description |
| Application Description |
for industrial applications only |
| Smart Element Interface |
| interfaces |
1 |
| Connection Mode |
Card Edge Connector |
| transmission speed |
See Systems Using Smart Element. |
| to ready |
< 500 ms |
| Module |
| Hex ID Encoding |
None |
| Process Data Channel |
16 bits |
| Input Address Area |
0 Byte |
| Output Address Area |
2 Byte |
| the required parameter data |
9 Byte |
|
6 Byte |
| digital quantity: |
| Output Name |
Digital Output |
| Connection Mode |
in-line connection |
| connection system |
1 Wire |
| outputs |
16 |
| protection circuit |
short circuit and overload protection; electronic |
| output voltage |
24V |
| Voltage limitation due to current interruption |
-32.8V DC ... -15V DC |
| the maximum output current of each module |
6 A (At the same time, make sure that the maximum allowable current of 6 A is not exceeded.) |
| Rated output voltage |
24V DC |
| Minimum load |
10 kΩ |
| is disconnected |
maximum 1V |
| is disconnected |
Maximum 300 & micro;A |
| load rating, inductive |
12 VA (1.2 H,48 Ω, rated voltage) |
| rated load, indicator light |
12W (rated voltage) |
| Rated load, resistive |
12W (48Ω, rated voltage) |
| Switching frequency |
maximum 1200 per second (resistive load, load current not less than 50 mA) |
| max. 1 second (with inductive load) |
| Max. 16 per second (with nominal lamp load) |
| reverse voltage against short pulses |
limited protection up to 0.5 A for 1 s |
| overload behavior |
shutdown |
| Inductor overload action |
output may be corrupted |
| signal delay |
maximum 100 & micro;s (at power-up) |
