ꄴPrevious： Phoenix TRIO-PS/1AC/48DC/10-Power 2866501
ꄲNext： Phoenix TRIO3-PS/3AC/24DC/40-Power 1159045

Phoenix TRIO-PS/1AC/12DC/ 5-power supply 2866475, TRIO POWER power supply for DIN rail installation, primary switching mode, input: 1 phase, output: 12V DC/5 A

Rated input voltage range 100V AC ... 240V AC
Input Voltage Range 85V AC ... 264V AC (attenuation <90V AC: per K2.5 %)
Attenuation < 90V AC (2.5 %/V)
AC input voltage range 85V AC ... 264V AC (attenuation <90V AC: per K2.5 %)
maximum dielectric strength 300V AC
Supply Voltage AC
Impulse current < 15 A
impulse current integral (I2t) < 0.5 A2s
AC frequency range 45Hz ... 65Hz
grid buffer time > 26 ms (120V AC)
> 100 ms (230V AC)
power consumption 1.1 A (100V AC)
0.5 A (240V AC)
Rated power consumption 112.5 VA
protection circuit transient surge protection; varistor
power factor (cos phi) 0.64
Typical Response Time < 1 s
Allowable Spare Fuses B6 B10 B16
recommend use 6 A ... 16 A (characteristics B, C, D, K)
PE discharge current < 3.5 mA

efficiency > 83% (230V AC and rated)
output characteristics U/ I
Rated output voltage 12V DC ±1%
output voltage (USet) setting range 10V DC ... 18V DC (> 12V DC, limited stable capacity)
Rated output current (IN) 5 A (-25°C ... 55 °C)
Attenuation 55°C ... 70°C (2.5 %/K)
feedback voltage resistance 25V DC
output < 25V DC
Maximum capacitive load Unlimited
Active Current Limit approx. 5.9A (in case of short circuit)
control deviation <1% (load change, static 10%... 90%)
<2% (change of load, dynamic 10%... 90%)
< 0.1 % (input voltage variation is ± 10 %)
residual wave < 20 mVSS
output power 60W
peak switching voltage rated load < 100 mVSS
maximum no-load power consumption 0.9W
Maximum rated load power loss 11W
rise time < 2 ms (UOUT(10%... 90%))
and connect Yes, for redundancy and increased capacity
Concatenation is
2866268
넳 넲

Phoenix TRIO-PS/1AC/12DC/ 5-Power 2866475

Product Center

PRODUCT CENTER

▼