ꄴPrevious： Phoenix TRIO-PS/1AC/48DC/ 5-Power 2866491
ꄲNext： Phoenix TRIO-PS/1AC/12DC/ 5-Power 2866475

Phoenix TRIO-PS/1AC/48DC/10-power supply 2866501, TRIO POWER power supply for DIN rail installation, primary switching mode, input: 1 phase, output: 48V DC/10 A

Rated input voltage range 100V AC ... 240V AC
Input Voltage Range 85V AC ... 264V AC (attenuation <90V AC: per K2.5 %)
Attenuation < 90V AC (2.5 %/V)
AC input voltage range 85V AC ... 264V AC (attenuation <90V AC: per K2.5 %)
maximum dielectric strength 300V AC
Supply Voltage AC
Impulse current < 15 A
impulse current integral (I2t) < 1.4 A2s
AC frequency range 45Hz ... 65Hz
grid buffer time > 13 ms (120V AC)
> 18 ms (230V AC)
power consumption 4.6 A (120V AC)
2.4 A (230V AC)
Rated power consumption 556 VA
protection circuit transient surge protection; varistor
power factor (cos phi) 0.96
Typical Response Time < 1 s
Allowable Spare Fuses B16
recommend use 16 A (characteristics B, C, D, K)
PE discharge current < 3.5 mA

efficiency > 91% (230V AC and rated)
output characteristics U/ I
Rated output voltage 48V DC ±1%
output voltage (USet) setting range 30V DC ... 56V DC (> 48V DC, limited stable capacity)
Rated output current (IN) 10 A (-25°C ... 55 °C)
Attenuation 55°C ... 70°C (2.5 %/K)
feedback voltage resistance 60V DC
output < 60V DC
Maximum capacitive load Unlimited
Active Current Limit approx. 11.4A (in case of short circuit)
control deviation <1% (load change, static 10%... 90%)
<2% (change of load, dynamic 10%... 90%)
< 0.1 % (input voltage variation is ± 10 %)
residual wave < 50 mVSS
output power 480W
peak switching voltage rated load < 50 mVSS
maximum no-load power consumption 8W
Maximum rated load power loss 49W
rise time < 2 ms (UOUT(10%... 90%))
and connect Yes, for redundancy and increased capacity
Concatenation is
2866381
넳 넲

Phoenix TRIO-PS/1AC/48DC/10-Power 2866501

Product Center

PRODUCT CENTER

▼