Phoenix TRIO-PS-2G/1AC/48DC/10-power supply 2903160, TRIO POWER switching power supply with in-line connection, suitable for DIN rail installation, single-phase input, output: 48V DC/10 A
AC operation
Network Type
star network
Rated input voltage range
100V AC ... 240V AC
Input Voltage Range
100V AC ... 240V AC -15 % ... +10%
maximum dielectric strength
≤ 300V AC 15 s
National Grid Typical Voltage
120V AC
230V AC
Supply Voltage
AC/DC
Impulse current
20 A (at 25°C)
impulse current integral (I2t)
< 0.7 A2s
Surge current limit
Typical 20 A (after 1 ms)
AC frequency range
50Hz ... 60Hz ± 10%
grid buffer time
Typical 10 ms (120V AC)
Typical 15 ms (230V AC)
power consumption
5.6 A (100V AC)
5.4 A (120V AC)
2.6 A (230V AC)
2.4 A (240V AC)
Rated power consumption
604.7 VA
protection circuit
transient surge protection; varistor
power factor (cos phi)
0.85
Typical Response Time
< 1 s
input fuse
10 A (built-in (equipment protection))
recommend use
10 A ... 16 A (characteristics B, C, D, K)
PE discharge current
< 3.5 mA
DC operation
Rated input voltage range
110V DC ... 250V DC
Input Voltage Range
99V DC ... 275V DC
turn-on voltage
≥ 93V DC
Shutdown Voltage
< 85V DC
Supply Voltage
AC/DC
grid buffer time
> 20 ms (230V AC)
power consumption
5 A (110V DC)
2.2 A (250V DC)
efficiency
> 93% (230V AC and rated)
output characteristics
U/ I with dynamic load reserve
Rated output voltage
48V DC ±1%
output voltage (USet) setting range
36V DC ... 55V DC (> 48V DC, limited stable capacity)
