Phoenix UNO-DIODE/5-24DC/2X10/1X20-redundant module 2905489, redundant module, 5V - 24V DC, 2 x 10 A, 1 x 20 A.
| DC operation |
| Rated input voltage range |
5V DC ... 24V DC |
| Input Voltage Range |
4.5V DC ... 30V DC |
| Supply Voltage |
DC |
| prevents polarity reversal |
<is 60V |
| Rated input current (IN) |
2x 10 A (-25°C ... 55 °C) |
| 1x 20 A (-25°C ... 55 °C) |
| 2x 10 A (-25°C ... 55 °C) |
| 1x 20 A (-25°C ... 55 °C) |
| Transient overvoltage protection |
varistor |
| voltage drop, input/output |
Typical 0.5V |
| efficiency |
> 97% |
| Rated output voltage |
UIn- 0,5V |
| Rated output current (IN) |
1x 20 A (-25°C ... 55 °C) |
| 2x 10 A (-25°C ... 55 °C) |
| Attenuation |
55°C ... 70°C (2.5 %/K) |
| Maximum rated load power loss |
5W (IOUT= 10 A) |
| Input |
| Connection Mode |
screw connection |
| Minimum cross section of rigid conductor |
0.2 mm² |
| Maximum cross section of rigid conductor |
2.5 mm² |
| Minimum cross section of flexible lead |
0.2 mm² |
| flexible conductor |
2.5 mm² |
| Single conductor/flexible connection point, cold press head with plastic sleeve, minimum |
0.2 mm² |
| Single wire/flexible connection point, cold press head with plastic sleeve, maximum |
2.5 mm² |
| single-conductor/flexible connection point, cold press head without plastic sleeve, minimum |
0.2 mm² |
| Single wire/flexible connection point, cold press head with plastic sleeve, maximum |
2.5 mm² |
| Minimum Wire Cross Section AWG |
24 |
| Maximum conductor cross section AWG |
14 |
| stripping length |
8mm |
| thread |
M3 |
| Minimum tightening torque |
0.5 Nm |
| Maximum tightening torque |
0.6 Nm |
| Output |
| Connection Mode |
screw connection |
| Minimum cross section of rigid conductor |
0.2 mm² |
| Maximum cross section of rigid conductor |
2.5 mm² |
| Minimum cross section of flexible lead |
0.2 mm² |
| flexible conductor |
2.5 mm² |
| Single conductor/flexible connection point, cold press head with plastic sleeve, minimum |
0.2 mm² |
| Single wire/flexible connection point, cold press head with plastic sleeve, maximum |
2.5 mm² |
| single-conductor/flexible connection point, cold press head without plastic sleeve, minimum |
0.2 mm² |
| Single wire/flexible connection point, cold press head with plastic sleeve, maximum |
2.5 mm² |
