Phoenix PLC-OSC- 24DC/TTL-solid state relay module 2982728, PLC solid state relay connected by screws, can be installed on DIN rail NS 35/7.5, input: 24V DC, output: TTL(5V DC)
| Product Type | Solid State Relay Module |
| product series | PLC-INTERFACE |
| Application | output |
| Mode of operation | 100% operating factor |
| insulation characteristics: electrical clearance and creepage distance between power supply circuits | |
| insulation | Foundation Isolation |
| Overvoltage Category | III |
| pollution level | 2 |
| Data Management Status | |
| Last data maintenance date | 21.03.2025 |
| rated conditions | 0.08W |
| test voltage (input/output) | 2.5 kVrms(50Hz,1 minute, input/output) |
| Electrical clearance and creepage distance between power supply circuits | |
| Rated insulation voltage | 250V DC |
| Rated overvoltage | 4 kV |
| Rated operating voltage UC | 24V DC |
| UC | 0.8 ... 1.2 |
| Rated operating current IC | 3.4 mA |
| switch threshold "0" signal, reference UN | < 0.4 |
| switch threshold "1" signal, reference UN | > 0.8 |
| UN | 3.4 mA |
| Typical Response Time | 35 µs |
| Typical closing time | 35 µs |
| Operating voltage display | yellow LED |
| protection circuit | polarity protection; parallel polarity protection diode |
| Surge Protection | |
| overvoltage protection | > 33V |
| sending frequency | 1 kHz |
| Name | Output Data |
| Contact Type | 1 N/O contact |
| Digital Output Design | electronic |
| Contact Type | signal contact |
| Rated control circuit supply voltage US | 5V DC |
| US | 0.9 ... 1.2 |
| Output Voltage Range | 4.5V DC ... 6V DC |
| limit continuous current | 50 mA (TTL load (fan output = 1)) |
| Fan off | 1 |
| overvoltage protection | > 8V |
| Voltage drop at maximum limited continuous current | < 80 mV |
| output circuit | 3-wire connection, reference ground |
| protection circuit | polarity protection; parallel polarity protection diode |
| Surge Protection |
Phoenix PLC-OSC- 24DC/TTL-Solid State Relay Module 2982728
