Phoenix PLC-RPT- 24DC/21-21AU/MS-Relay module 2910524,PLC-INTERFACE, including relay base and pluggable multi-layer gold contact relay (with manual operation, integrated status LED and freewheeling diode), in-line connection, 2 changeover contacts, freewheeling diode, input voltage: 24V DC
Product Type
Relay Module
product series
PLC-INTERFACE
Application
Handheld Switch
Mode of operation
100% operating factor
mechanical life
5x106Switch Times
insulation characteristics: electrical clearance and creepage distance between power supply circuits
insulation
safety isolation, reinforced insulation
Overvoltage Category
III
pollution level
2
Data Management Status
Last data maintenance date
20.03.2025
rated conditions
0.44W
test voltage (coil/contact)
4 kVrms(50 Hz,1 min)
test voltage (changeover contact/changeover contact)
2.5 kVrms(50 Hz,1 min)
Electrical clearance and creepage distance between power supply circuits
Rated insulation voltage
250V AC
Rated overvoltage
6 kV
coil side
Rated input voltage UN
24V DC
Input Voltage Range
20.2V DC ... 33.6V DC (20 °C)
rated voltage ("hot" plug electromagnetic relay)
24V DC
drives and functions
monostable
drive (polarity)
polarization
UN
18 mA
Typical Response Time
10 ms
Typical release time
10 ms
protection circuit
surge protection; freewheeling diode
Operating voltage display
yellow LED
switching
Contact Type
2 changeover contacts
Switch Contact Type
Single contact
Contact Material
AgNi, hard gold plating
maximum switching voltage
30V AC
36V DC
Minimum Switching Voltage
12V (1 mA)
limit continuous current
50 mA
Maximum impact current
50 mA
minimum switching current
1 mA (12 V)
switching: when the gold plating layer is destroyed
Considerations
If the gold plating is damaged, the following values are applicable.
