Phoenix PLC-RPT- 24UC/ 1/S/H-switch 2900328, PLC-INTERFACE with switch (using manual operation) and integrated power contact relay for "manual", "reset" and "automatic" functions, plug-in link, can be installed on DIN NS 35/7.5, 1 normally open contact, input voltage 24V AC/DC
| Product Type | Relay Module |
| Product Series | PLC-INTERFACE |
| Application | Handheld Switch |
| Mode of operation | 100% operating factor |
| insulation characteristics: electrical clearance and creepage distance between power supply circuits | |
| Overvoltage Category | III |
| pollution level | 2 |
| Data Management Status | |
| Last data maintenance date | 20.03.2025 |
| rated conditions | 0.26W |
| Electrical clearance and creepage distance between power supply circuits | |
| Rated insulation voltage | 250V AC |
| Rated overvoltage | 6 kV |
| coil side | |
| Rated input voltage UN | 24V AC/DC |
| Input Voltage Range | 19.4V AC/DC ... 33.6V AC/DC (20 °C) |
| rated voltage ("hot" plug electromagnetic relay) | 24V DC |
| drives and functions | monostable |
| drive (polarity) | polarization |
| UN | 11 mA |
| Typical Response Time | 6 ms |
| Typical Release Time | 15 ms |
| protection circuit | bridge rectifier |
| Operating voltage display | yellow LED |
| switching | |
| Contact Type | 1 N/O contact |
| Switch Contact Type | single contact |
| Contact Type | power supply pin position |
| Contact Material | AgSnO, hard gold plating |
| maximum switching voltage | 250V AC/DC |
| Minimum Switching Voltage | 5V (100 mA) |
| limit continuous current | 6 A |
| Maximum impact current | according to customer requirements |
| minimum switching current | 10 mA (12 V) |
| short-circuit current | 200 A (condition short circuit current) |
| Maximum power rating (resistive load) | 140W (24V DC) |
| 20W (available for 48V DC) | |
| 18W (available for 60V DC) | |
| 23W (available for 110V DC) | |
| 40W (available for 220V DC) | |
| 1500 VA (available for 250V AC) | |
| output fuse | 4 A gL/gG NEOZED |
Phoenix PLC-RPT- 24UC/ 1/S/H-Switch 2900328
