Phoenix PLC-RPT-230UC/21-21/SO46-Relay module 1136245, the use of PLC-INTERFACE can prevent interference current or interference voltage on the control side. Including base terminals, using plug-in connection, with "hot" plug-in miniature relay equipped with power contacts, 2 changeover contacts, 230V AC input voltage
| Product Type | Relay Module |
| Product Series | PLC-INTERFACE |
| Application | anti-interference filter |
| Mode of operation | 100% operating factor |
| mechanical life | approx. 3x 107times |
| insulation characteristics: electrical clearance and creepage distance between power supply circuits | |
| insulation | Foundation Isolation |
| Overvoltage Category | III |
| pollution level | 3 |
| Data Management Status | |
| Last data maintenance date | 21.03.2025 |
| rated conditions | 2.3W |
| test voltage (coil/contact) | 4 kVrms(50Hz,1 min, coil/contact) |
| Electrical clearance and creepage distance between power supply circuits | |
| Rated insulation voltage | 250V AC |
| Rated overvoltage | 4 kV (safe isolation, reinforced insulation and 6 kV between input circuit and output contact current paths) |
| coil side | |
| Rated input voltage UN | 230V AC |
| 220V DC | |
| Input Voltage Range | 179.4V AC ... 264.5V AC (20 °C) |
| 171.6V DC ... 253V DC (20 °C) | |
| rated voltage ("hot" plug electromagnetic relay) | 110V DC |
| mains frequency | 50/60Hz |
| drives and functions | monostable |
| drive (polarity) | polarization |
| UN | 8.5 mA (50 Hz) |
| 10 mA (60 Hz) | |
| Typical Response Time | 7 ms |
| Typical release time | 10 ms |
| regular release voltage | 60V AC |
| protection circuit | RC element |
| Bridge Rectifier | |
| Status Display | LED (yellow) |
| switching | |
| Contact Type | 2 changeover contacts |
| Switch Contact Type | Single contact |
| Contact Material | AgNi |
| maximum switching voltage | 250V AC/DC |
| Minimum Switching Voltage | 5V (10 mA) |
| limit continuous current | 6 A |
| Maximum impact current | 15 A (300 ms) |
| minimum switching current | 10 mA (5 V) |
| Maximum power rating (resistive load) | 144W (24V DC) |
| 96W (48V DC) | |
| 60W (60V DC) | |