Phoenix PLC-RSC- 24UC/ 1/S/H-switch 2982236, PLC-INTERFACE with switch (operated by hand), can be used for "manual, zero and automatic" functions, using screw connection and integrated power Contact relay, for installation on DIN rail NS 35/7.5, 1 normally open contact, input voltage 24V AC/DC

Product Type Relay Module
Product Series PLC-INTERFACE
Application Handheld Switch
Mode of operation 100% operating factor
insulation characteristics: electrical clearance and creepage distance between power supply circuits
Overvoltage Category III
pollution level 3
Data Management Status
Last data maintenance date 21.03.2025

rated conditions 0.26W
Electrical clearance and creepage distance between power supply circuits
Rated insulation voltage 250V AC
Rated overvoltage 6 kV

coil side
Rated input voltage UN 24V AC/DC
Input Voltage Range 19.4V AC/DC ... 33.6V AC/DC (20 °C)
rated voltage ("hot" plug electromagnetic relay) 24V DC
drives and functions monostable
drive (polarity) polarization
UN 11 mA
Typical Response Time 6 ms
Typical release time 15 ms
protection circuit bridge rectifier
Operating voltage display yellow LED

switching
Contact Type 1 N/O contact
Switch Contact Type single contact
Contact Type power supply pin position
Contact Material AgSnO, hard gold plating
maximum switching voltage 250V AC/DC
Minimum Switching Voltage 5V (100 mA)
limit continuous current 6 A
Maximum impact current according to customer requirements
minimum switching current 10 mA (12 V)
short-circuit current 200 A (condition short-circuit current)
Maximum power rating (resistive load) 140W (24V DC)
20W (available for 48V DC)
18W (available for 60V DC)
23W (available for 110V DC)
40W (available for 220V DC)
1500 VA (available for 250V AC)
output fuse 4 A gL/gG NEOZED

Connection Mode screw connection
stripping length 8mm
thread M3
2902968

Phoenix PLC-RSC- 24UC/ 1/S/H-Switch 2982236

Product Center

PRODUCT CENTER