Phoenix PLC-RSC-230UC/21HC/SO46-relay module 1125943, can resist the PLC-INTERFACE of interference current/voltage on the control side. Including PLC-BSC-230UC/21HC/SO46 base terminals, using screw connection, with plug-in miniature relay with power contacts up to 10 A, 1 change-over contact, 230V AC input voltage
Product Type
Relay Module
Product Series
PLC-INTERFACE
Application
anti-interference filter
Mode of operation
100% operating factor
mechanical life
approx. 3x 107times
insulation characteristics: electrical clearance and creepage distance between power supply circuits
insulation
Foundation Isolation
Overvoltage Category
III
pollution level
3
Data Management Status
Last data maintenance date
21.03.2025
rated conditions
2.3W
test voltage (coil/contact)
4 kVrms(50Hz,1 min, coil/contact)
Electrical clearance and creepage distance between power supply circuits
Rated insulation voltage
250V AC
Rated overvoltage
4 kV (safe isolation, reinforced insulation and 6 kV between input circuit and output contact current paths)
coil side
Rated input voltage UN
230V AC
220V DC
Input Voltage Range
179.4V AC ... 264.5V AC (20 °C)
171.6V DC ... 253V DC (20 °C)
rated voltage ("hot" plug electromagnetic relay)
110V DC
mains frequency
50/60Hz
drives and functions
monostable
drive (polarity)
polarization
UN
8.5 mA (50 Hz)
10 mA (60 Hz)
Typical Response Time
7 ms
Typical release time
10 ms
regular release voltage
60V AC
protection circuit
RC element
Bridge Rectifier
Status Display
LED (yellow)
switching
Contact Type
1 changeover contact
Switch Contact Type
single contact
Contact Material
AgNi
maximum switching voltage
250V AC/DC
Minimum Switching Voltage
12V (10 mA)
limit continuous current
6 A
10 A (This value only applies to terminal 12. If terminal 12 is shorted, the rating of the relay is used.)
Maximum impact current
30 A (300 ms, normally open contact)
minimum switching current
10 mA (12 V)
Maximum power rating (resistive load)
144W (24V DC)
240W (24V DC, value valid for connection 12. If connection 12 is bridged, the rating applies.)
58W (48V DC)
48W (60V DC)
50W (110V DC)
80W (220V DC)
1500 VA (250V AC)
2500W (250V DC, the value is valid for connection 12. If connection 12 is bridged, the rated value applies.)
