Phoenix PLC-V8L/D15S/OUT-system connection 1104789,V8 adapter for 8 x PLC-INTERFACE (14mm), connection 1: D-SUB pin connector 1x 15-position, connection 2: in-line connection (can be snap to 8x PLC-INTERFACE terminals), connection 3: screw connection 1x 2-position, number of channels: 8, control logic: forward switching
| Product Type | Interface Module |
| Product Series | PLC-INTERFACE |
| Bits | 15 |
| Channels | 8 |
| Mode of operation | 100% operating factor |
| insulation characteristics: electrical clearance and creepage distance | |
| insulation | Functional insulation |
| Overvoltage Category | II |
| pollution level | 2 |
| Operating voltage range | 18V DC ... 30V DC |
| current (per branch) | ≤ 1 A |
| current (power) | ≤ 3 A |
| electrical clearance and creepage distance | |
| Rated insulation voltage | 50V |
| Rated overvoltage | 0.5 kV (1.2 / 50 μs) |
| Supported Controller Generic | |
| Applicable I/O Card | universal |
| Interface 1 (Control Layer) | |
| connection meets standards | IEC 60807-2 |
| Connection Mode | D-SUB Pin Connectors |
| thread | UNC 4-40 |
| connection quantity | 1 |
| Bits | 15 |
| Insertion/unplugging cycle | > 500 |
| needle pitch | 2.74mm |
| interface 2 (field side) | |
| Connection Mode | in-line connection |
| Considerations | can be snap onto 8x PLC-INTERFACE terminals |
| interface 3 (power supply) | |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| connection quantity | 1 |
| Bits | 2 |
| Rigid conductor cross section | 0.2 mm² ... 4 mm² |
| rigid wire cross section (2 wires with the same cross section) | 0.2 mm² ... 1.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| 0.25 mm² ... 2.5 mm² (cold press head without plastic sleeve) | |
| 0.25 mm² ... 2.5 mm² (cold press head with plastic sleeve) | |
| flexible wire cross section (2 wires with the same cross section) | 0.2 mm² ... 1.5 mm² |
| 0.25 mm² ... 0.75 mm² (cold press head without plastic sleeve) | |
| 0.5 mm² ... 1.5 mm² (TWIN sleeve with plastic insulating sleeve) | |