ꄴPrevious： Phoenix PSR-M-GW-MODTCP-PI-Data Interface 1105127
ꄲNext： Phoenix PSR-M-GW-ECAT-SC-Data Interface 1105130

Phoenix PSR-M-GW-ETH-PI-data interface 1105107, used to connect the PSR-M base module to the gateway of the upper-level controller, supports EtherNet/IP™ protocol, TBUS interface, pluggable in-line terminals, and includes TBUS connector

insulation characteristics
Overvoltage Level II
pollution level 2

rated conditions 1.92W
Rated operating mode 100% Eligible
Interface DIN rail TBUS for connecting the host module, within the scope of delivery
rated overvoltage/insulation 4 kV foundation isolation
Power
Name A1/A2
Rated control circuit supply voltage US 19.2V DC ... 28.8V DC
Rated control circuit supply voltage US 24V DC-20%/+ 20% (external fuse, typical 4 A)
Rated control supply current IS Typical 60 mA (no network connection)
Typical 70 mA (1 network interface)
Typical 80 mA (2 network interfaces)
US Typical 1.68W (1 network interface)
Typical 1.92W (2 network interfaces)
Impulse current < 2.2 A (&Delta;t = 1 ms Us)
filter time typical 5 ms (at A1, at the voltage dip Us)
protection circuit series protection to prevent polarity reversal
suppression diode

Connection Mode in-line connection
stripping length 10mm

data: network interface
Communication Transport Protocol EtherNet/IP™
Connection Mode RJ45 female connector
connection quantity 2
transmission speed 100 Mbps
Data: Service Interface
Connection Mode High-speed USB 2.0
connection quantity 1

Status Display 1 x LED (green),2 x LED (green, red)
Operating voltage display 1 x LED (green)
error indication 2 x LED (red)

width 22.61mm
height 107.74mm
depth 113.6mm
1105127
넳 넲

Phoenix PSR-M-GW-ETH-PI-Data Interface 1105107

Product Center

PRODUCT CENTER

▼