Phoenix MCR-PS- 24DC/2X24DC-auxiliary contact 2781877,DC/DC converter, with galvanized output insulation, input 24V DC, output 2 x 24V DC/2 x 30 mA
| input voltage | 24V DC ±10% |
| Rated input voltage range | 24V DC |
| Input Voltage Range | 21.6V DC ... 26.4V DC |
| Wide Input | is |
| Supply Voltage | DC |
| power consumption | approx. 100 mA |
| Rated output voltage | 24V DC (2x) |
| Rated output current (IN) | 30 mA (2x) |
| residual wave | ≤ 50 mVSS |
| Short-circuit protection | is |
| output power | 1.5W |
| Input | |
| Connection Mode | screw connection |
| Minimum cross section of rigid conductor | 0.2 mm² |
| Maximum cross section of rigid conductor | 2.5 mm² |
| flexible lead | 0.2 mm² |
| Flexible lead maximum cross section | 2.5 mm² |
| Minimum Wire Cross Section AWG | 24 |
| Maximum conductor cross section AWG | 14 |
| stripping length | 8mm |
| thread | M3 |
| Output | |
| Connection Mode | screw connection |
| Minimum cross section of rigid conductor | 0.2 mm² |
| Maximum cross section of rigid conductor | 2.5 mm² |
| flexible lead | 0.2 mm² |
| Flexible lead maximum cross section | 2.5 mm² |
| Minimum Wire Cross Section AWG | 24 |
| Maximum conductor cross section AWG | 14 |
| stripping length | 8mm |
| phase number | 1 |
| Test voltage output/output | 1.5 kV AC |
| Test voltage input/output | 2.5 kV AC |
| Product Type | DC/DC converter |
| Mode of operation | 100% operating factor |
| width | 25mm |
| height | 85.5mm |
| depth | 79mm |
| Assembly Instructions | arbitrary |
| Installation position | arbitrary |
| with protective coating | No |
Phoenix MCR-PS- 24DC/2X24DC-Auxiliary contact 2781877
