Phoenix MCR-S10-50-UI-SW-DCI-NC-current transmitter 2814744,MCR current measurement transmitter, programmable and configurable, can measure DC, AC and distortion current, with relay and transistor output, input current 0...10 to 0...50 A, unconfigured
total error
≤ 1.5 % (temperature range)
rated conditions
2.2W
Measurement Level
III
test voltage, output/power supply
500V AC (50 Hz, 60 s)
test voltage, input/output
4 kV AC (50 Hz, 60 s)
test voltage, input/power supply
4 kV AC (50 Hz, 60 s)
protection circuit
surge protection; 33V suppressor diode
step response (10-90%)
330 ms (AC)
40 ms (DC)
temperature coefficient, typical
< 0.025 %/K
Maximum transmission error
< 0.5 % (at rated state, within rated range)
Rated insulation voltage
300V AC (ground)
power supply
Supply Voltage Range
20V DC ... 30V DC
Maximum current consumption
< 50 mA (no load)
measurement
configurable/programmable
Yes, not configured
Input current range
0 A AC/DC ... 55 A AC/DC (Allowable continuous overload: 120%)
