Phoenix MCR-SL-S-200-I-LP-current transmitter 2813499,MCR current measurement transmitter, used to measure sinusoidal and non-sinusoidal AC currents, input current 0...200A, loop power supply output 4...20mA
| Product Type | Current transmitter |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| rated conditions | 1W |
| test voltage, input/output | 4.13 kV AC (50 Hz, 60 s) |
| step response (10-90%) | < 340 ms |
| maximum temperature coefficient | < 0.025 %/K |
| Maximum transmission error | <1% (of terminal value) |
| Rated insulation voltage | 300V AC (ground) |
| power supply | |
| Supply Voltage Range | loop power supply, no external power supply required |
| signal | |
| configurable/programmable | is |
| current input signal | 0 A ... 200 A |
| measurement | |
| Input current range | 0 A AC ... 100 A AC |
| 0 A AC ... 150 A AC | |
| 0 A AC ... 200 A AC | |
| the setting range of the minimum input current | 0 A AC ... 100 A AC |
| maximum input current | 0 A AC ... 200 A AC |
| Overload | depends on bottom wire |
| surge strength | depends on the wire connected by the perforation. |
| Frequency measurement range | 30Hz ... 6000Hz |
| Curve Type | sinusoidal and non-sinusoidal |
| Operating Threshold | 1% (of terminal value) |
| signals: current | |
| current output signal | 4 mA ... 20 mA |
| Maximum current output signal | < 25 mA |
| load/output load current output | (UB- 12 V) x 350 / 12 A |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 14 |
| Tightening torque | 0.5 Nm ... 0.6 Nm (4,4 ... 5,31 lbf-in.) |
| Connection Mode | perforated connection |
| Product Size | |
| width | 55mm |
| height | 85mm |
| depth | 70.5mm |
| Round wire | |
| diameter | ≤ 18.5mm |
| color | Green (RAL 6021) |
| Shell Material | Non-reinforced polyamide PA |
| environmental conditions | |
| protection level | IP20 |
| ambient temperature (operation) | -20°C ... 60°C |
| ambient temperature (storage/transport) | -40°C ... 85°C |
Phoenix MCR-SL-S-200-I-LP-current transmitter 2813499
