Phoenix TTC-6-GDT-C-110AC-UT-I-surge protector 2906844, thick surge protection, built-in status indicator, for signal cables with ground reference potential. Can be used in safety-related circuits up to SIL 3.
| Product Type | measurement and control technology |
| Product Series | TERMITRAB complete |
| IEC Category | C1 |
| C2 | |
| C3 | |
| D1 | |
| type | rail mounting module, monolithic |
| Surge protection fault alarm | with visual status indication window |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated voltage UN | 110V AC |
| Connection Mode | screw connection |
| thread | M3 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Rigid conductor cross section | 0.2 mm² ... 4 mm² |
| Connectable Guide Cross Section AWG | 24 ... 12 |
| Dimensional drawing | |
| width | 6.2mm |
| height | 92mm |
| depth | 69.5mm (7.5mm with DIN rail) |
| color | gray (RAL 7042) |
| flame retardant rating, according to UL 94 | V-0 |
| insulation material | PBT |
| Shell Material | PBT |
| Mechanical parameters | |
| Open Side Panel | is |
| Direction of action | Line-Earth Ground |
| Maximum continuous voltage Uc | 130V AC |
| Rated current | 2 A (60 °C) |
| UC, the effective working current IC | ≤ 1 µA |
| Residual Flow IPE | ≤ 1 µA |
| Rated discharge current In(8/20)& micro;s (core-ground) | 5 kA |
| pulse discharge current Iimp(350) & micro;s (core-ground) | 0.5 kA |
| voltage protection level Up(line-ground) | ≤ 800V (C1 - 2 kV) |
| ≤ 1 kV (C2 - 10 kV) | |
| ≤ 800V (C3 - 25 A) | |
| ≤ 900V (C3 - 100 A) | |
| response time tA (core-ground) | ≤ 100 ns |
| input attenuation AE, asymmetric. | Typical 0.3 dB (≤ 8 MHz/150 Ω) |
| Typical 0.3 dB (≤ 30 MHz/50 Ω) | |
| cutoff frequency fg(3 dB), asymmetric. (PE) in a 50 Ω system | Typical 130 MHz |
| cutoff frequency fg(3 dB), asymmetric. (PE) in the 150 Ω system | Typical 25 MHz |
| capacitance (core-ground) | 5 pF |
| the resistance of each path | ≤ 100 mΩ |
| Surge protection fault alarm | with visual status indication window |
| Impact resistance (line-ground) | C1 - 1 kA |
| C2 - 5 kA | |
| C3 - 100 A | |
| D1 - 500 A | |
| pulse reset time (lead-ground) | ≤ 1 ms |
Phoenix TTC-6-GDT-C-110AC-UT-I-Surge Protector 2906844
