Phoenix TTC-6P-1X2-12DC-UT-I-surge protector 2908192, surge protection, including protective plug and base element, built-in status indicator, used for 2-wire floating ground signal circuit. Can be used in safety-related circuits up to SIL 3.
| Product Type | measurement and control technology |
| product series | TERMITRAB complete |
| IEC Category | C1 |
| C2 | |
| C3 | |
| D1 | |
| type | DIN rail module, split, detachable |
| line pairs per module | 1 |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated voltage UN | 12V DC |
| Connection Mode | screw connection |
| thread | M3 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Rigid conductor cross section | 0.2 mm² ... 4 mm² |
| Attachable Guide Cross Section AWG | 24 ... 12 |
| Dimensional drawing | |
| width | 6.2mm 0.1mm |
| height | 105.8mm |
| depth | 100 mm (7.5mm with DIN rail) |
| color (basic element) | gray (RAL 7042) |
| color (pin connector) | light gray (RAL 7035) |
| flame retardant rating to UL 94 | V-0 |
| insulation material | PBT |
| Shell Material | PBT |
| Mechanical parameters | |
| Open Side Panel | No |
| Direction of action | Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground |
| Maximum continuous voltage Uc | 15V DC |
| 10V AC | |
| Rated current | 600 mA (56°C) |
| UC, the effective working current IC | ≤ 100 µA |
| Residual Flow IPE | ≤ 1 µA |
| Nominal discharge current In(8/20) & micro;s (core-core) | 5 kA |
| Rated discharge current In(8/20)& micro;s (core-ground) | 5 kA |
| pulse discharge current Iimp(350) & micro;s (core-core) | 0.5 kA |
| pulse discharge current Iimp(350) & micro;s (core-ground) | 0.5 kA |
| Total discharge current ITotal(8/20) µs | 10 kA |
| voltage protection level Up(core-core) | ≤ 220V (C1 - 1 kV / 500 A) |
| ≤ 350V (C2 - 10 kV / 5 kA) | |
| ≤ 25V (C3 - 25 A) | |
| ≤ 35V (C3 - 100 A) |
Phoenix TTC-6P-1X2-12DC-UT-I-Surge Protector 2908192
