ꄴPrevious： Phoenix TTC-6P-1X2-F-M-24DC-UT-I-Surge Protector 2906781
ꄲNext： Phoenix TTC-6P-1X2-F-24DC-PT-I-Surge Protector 1065318

Phoenix TTC-6P-1X2-F-M-24DC-PT-I-surge protector 2906790, surge protection, including protection plug and base element, built-in status indicator and breaking switch, used for 2-wire floating signal circuit, such as 0(4) mA ... 20 mA current cycle. Indirect grounding via gas discharge tube, HART compatible. Can be used in safety-related circuits up to SIL 3.

Product Type measurement and control technology
product series TERMITRAB complete
IEC Category C1
C2
C3
D1
type DIN rail module, split, detachable
line pairs per module 1
insulation characteristics
Overvoltage Category III
pollution level 2

Rated voltage UN 24V DC

Connection Mode in-line connection
Flexible Wire Cross Section 0.2 mm² ... 2.5 mm²
Rigid conductor cross section 0.2 mm² ... 4 mm²
Connectable Guide Cross Section AWG 24 ... 12

Dimensional drawing
width 6.2mm 0.1mm
height 105.8mm
depth 100 mm (7.5mm with DIN rail)

color (basic element) gray (RAL 7042)
color (pin connector) light gray (RAL 7035)
flame retardant rating to UL 94 V-0
insulation material PBT
Shell Material PBT

Mechanical parameters
Open Side Panel No

Direction of action Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground
Maximum continuous voltage Uc 30V DC
21V AC
Rated current 600 mA (56°C)
UC, the effective working current IC ≤ 5 µA
Residual Flow IPE ≤ 1 µA
Nominal discharge current In(8/20) & micro;s (core-core) 5 kA
Rated discharge current In(8/20)& micro;s (core-ground) 5 kA
pulse discharge current Iimp(350) & micro;s (core-core) 0.5 kA
pulse discharge current Iimp(350) & micro;s (core-ground) 0.5 kA
Total discharge current ITotal(8/20) µs 10 kA
voltage protection level Up(core-core) ≤ 200V (C1 - 1 kV / 500 A)
≤ 320V (C2 - 10 kV / 5 kA)
≤ 50V (C3 - 25 A)
≤ 55V (C3 - 100 A)
2906815
넳 넲

Phoenix TTC-6P-1X2-F-M-24DC-PT-I-Surge Protector 2906790

Product Center

PRODUCT CENTER

▼