Phoenix TTC-6P-4-24DC-PT-I-surge protector 1106014, surge protection, including protective plug and base element, built-in status indicator, 4-wire floating ground signal circuit for high rated current. Ideal for 4-wire measurements such as temperature and weight. Can be used in safety-related circuits up to SIL 3.

Product Type measurement and control technology
product series TERMITRAB complete
IEC Category C1
C2
C3
D1
type DIN rail module, split, detachable
insulation characteristics
Overvoltage Category III
pollution level 2

Rated voltage UN 24V DC
24V AC

Connection Mode in-line connection
Flexible Wire Cross Section 0.2 mm² ... 2.5 mm²
Rigid conductor cross section 0.2 mm² ... 4 mm²
Attachable Guide Cross Section AWG 24 ... 12

Dimensional drawing
width 6.2mm 0.1mm
height 125mm
depth 100 mm (7.5mm with DIN rail)

color (basic element) gray (RAL 7042)
color (pin connector) light gray (RAL 7035)
flame retardant rating, according to UL 94 V-0
insulation material PBT
Shell Material PBT

Mechanical parameters
Open Side Panel No

movement direction Line-Line & Line-Earth Ground
Maximum continuous voltage Uc 36V DC
30V AC
Rated current 2.5 A (insulation system 60°C)
UC, the effective working current IC ≤ 5 µA
Residual Flow IPE ≤ 1 µA
Nominal discharge current In(8/20) & micro;s (core-core) 350 A
Rated discharge current In(8/20)& micro;s (core-ground) 5 kA
pulse discharge current Iimp(350) & micro;s (core-ground) 0.5 kA
Total discharge current ITotal(8/20) µs 10 kA
voltage protection level Up(core-core) ≤ 100V (C1 - 0.7 kV / 350 A)
≤ 100V (C3 - 50 A)
≤ 80V (C3 - 25 A)
voltage protection level Up(line-ground) ≤ 900V (C1 - 1 kV / 500 A)
≤ 900V (C2 - 10 kV / 5 kA)
response time tA(core-core) ≤ 1 ns
response time tA (core-ground) ≤ 100 ns
input attenuation AE, symmetric. Typical 0.3 dB (≤ 12 MHz / 150 Ω)
2906815

Phoenix TTC-6P-4-24DC-PT-I-Surge Protector 1106014

Product Center

PRODUCT CENTER