Phoenix TTC-6-SFP-24AC-PT-EMC filter surge protection device 1316312, surge protection with filtering function, used for 2-wire floating signal circuits, such as 0(4) mA ... 20 mA current circuits, HART compatible.
Product Type
interference suppression filter
Product Series
TERMITRAB complete
IEC Category
C1
C3
type
rail mounting module, monolithic
insulation characteristics
Overvoltage Category
III
pollution level
2
Rated voltage UN
24V DC
Connection Mode
in-line connection
Flexible Wire Cross Section
0.2 mm² ... 2.5 mm²
Rigid conductor cross section
0.2 mm² ... 2.5 mm²
Attachable Guide Cross Section AWG
24 ... 14
Dimensional drawing
width
6.2mm +0.1mm
height
105.8mm
depth
69.5mm (7.5mm with DIN rail)
color
gray (RAL 7042)
light gray (RAL 7035)
flame retardant rating to UL 94
V-0
insulation material
PBT
Shell Material
PBT
Mechanical parameters
Open Side Panel
No
Maximum continuous voltage Uc
38V DC
30V AC
Rated current
500 mA
UC, the effective working current IC
≤ 0.1 µA
Residual Flow IPE
≤ 10 µA
Rated discharge current In(8/20)& micro;s (core-ground)
350 A
Total discharge current ITotal(8/20) µs
700 A
voltage protection level Up(line-ground)
≤ 80V (C1 - 0.5 kV / 250 A)
≤ 80V (C3 - 20 A)
response time tA (core-ground)
≤ 25 ns
input attenuation AE, symmetrical.
Typical 0.3 dB (≤ 50 kHz / 150 Ω)
input attenuation AE, asymmetric.
Typical 0.3 dB (≤ 30 kHz / 50 Ω)
cut-off frequency fg(3 dB),50 Ω symmetric system
Typical 85 kHz
cut-off frequency fg(3 dB),150 Ω symmetric system
Typical 95 kHz
cutoff frequency fg(3 dB), asymmetric. (PE) in a 50 Ω system
