Phoenix DEK-OE- 24DC/ 48DC/100-solid state relay terminal 2940207, input solid state relay terminal, input: 24V DC, output: 3 - 48V DC/100 mA, terminal width: 6.2mm
| Product Type | Solid State Relay Module |
| product series | DEK |
| Application | output function |
| Mode of operation | 100% operating factor |
| Insulation Characteristics: Standards/Regulations | |
| insulation | Foundation Isolation |
| Overvoltage Category | III |
| pollution level | 2 |
| Data Management Status | |
| Last data maintenance date | 19.03.2025 |
| rated conditions | 10 mW |
| test voltage (input/output) | 2.5 kV AC (input/output) |
| Rated input voltage UN | 24V DC |
| relative to UNinput voltage range | 0.8 ... 1.2 |
| Input Voltage Range | 19.2V DC ... 28.8V DC |
| switch threshold "0" signal, reference UN | ≤ 0.4 |
| switch threshold "1" signal, reference UN | ≥ 0.8 |
| UN | 7 mA |
| Typical Response Time | 20 µs |
| Typical closing time | 200 µs |
| Operating voltage display | Green LED |
| protection circuit | polarity protection |
| sending frequency | 300Hz |
| Contact Type | 1 N/O contact |
| Digital Output Design | electronic |
| Output Voltage Range | 3V DC ... 48V DC |
| limit continuous current | 100 mA |
| Voltage drop at maximum limited continuous current | ≤ 0.9V |
| output circuit | 2 lines, floating ground; 3 lines, reference ground |
| protection circuit | polarity protection; polarity protection diode |
| backup diode; freewheeling diode | |
| output resistance | approx. 22 kΩ (3-wire system) |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 14 |
| Tightening torque | 0.5 Nm |
| width | 6.2mm |
| height | 80mm |
| depth | 56mm |
Phoenix DEK-OE- 24DC/ 48DC/100-solid state relay terminal 2940207
