Phoenix FIL-1S-1-20A-230AC-UT-EMC filter 1292318, electromagnetic compatibility filter (power filter) is suitable for single-phase AC and DC systems (rated voltage: up to 230V AC, up to 220V DC), can be installed on NS 35, rated current: 20 A
| Product Type | interference suppression filter |
| type | rail mounting module, monolithic |
| Bits | 2 |
| Rated frequency fN | 50Hz (60 Hz) |
| Rated voltage UN | 230V AC (TN-S/TT) |
| 230V AC (IT, L-L) | |
| 120V AC (TN-S/TT) | |
| 120V AC (IT, L-L) | |
| 220V DC | |
| rated voltage (UR) | 250V AC |
| 250V DC |
| Connection Mode | screw connection |
| thread | M3 |
| Tightening torque | 0.5 Nm |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Connectable Guide Cross Section AWG | 24 ... 12 |
| Dimensional drawing | |
| width | 45mm |
| height | 99mm |
| depth | 99.5mm |
| color | gray (RAL 7042) |
| light gray (RAL 7035) | |
| flame retardant rating to UL 94 | V-0 |
| Shell Material | PC-GF10 |
| Mechanical parameters | |
| Open Side Panel | No |
| Rated frequency fN | 50Hz (60 Hz) |
| Rated current | 20 A (50 °C) |
| Residual Flow IPE | ≤ 0.2 mA |
| input attenuation AE, symmetric. | > 65 dB (50 Ω / 1 MHz) |
| input attenuation AE, asymmetric. | > 20 dB (50 Ω / 1 MHz) |
| Capacity | 2x 470 nF (X2) |
| 2x 2.2 nF (Y2) | |
| serial inductance | 2x 2.5 mH (with current compensation) |
| Rated short-circuit current ISCCR | 10 kA AC (gG) |
| 3 kA AC (MCB B) | |
| 6 kA DC (gG) | |
| 20 A AC/DC (gG) | |
| 20 A AC (MCB B) | |
| filter data | |
| discharge resistance | 940 kΩ |
Phoenix FIL-1S-1-20A-230AC-UT-EMC filter 1292318
