Phoenix LIT 4-24-Surge protector 2804678, integrated surge protector, 6.2mm thick, installed on DIN rail, used to protect 4 floating signal lines.

Product Type measurement and control technology
Product Series LINETRAB
IEC Category C1
C2
C3
D1
type rail mounting module, monolithic
insulation characteristics
Overvoltage Category III
pollution level 2

Rated voltage UN 24V DC

Connection Mode screw connection
thread M3
Tightening torque 0.8 Nm
Flexible Wire Cross Section 0.2 mm² ... 2.5 mm²
Rigid conductor cross section 0.2 mm² ... 2.5 mm²
Attachable Guide Cross Section AWG 24 ... 14

Maximum internal capacitance CI Typical 2.5 nF
Maximum internal inductance LI < 1 &micro;H
Maximum input current II 500 mA (T4/≤ 80°C)
500 mA (T5 / ≤ 50°C)
500 mA (T6 / ≤ 40°C)
Maximum input voltage UI 36V DC
Maximum input power PI 550.00 mW
the maximum internal time factor (RI/LI) 10 &micro;s

Dimensional drawing
width 6.2mm
height 93.1mm
depth 102.5mm (7.5mm with DIN rail)

color Smoke gray (RAL 7016)
flame retardant rating, according to UL 94 V-0
insulation material PBT
Shell Material PBT

Mechanical parameters
Open Side Panel No

movement direction Line-Line & Line-Earth Ground
Maximum continuous voltage Uc 36V DC
25V AC
Rated current 500 mA (40°C)
UC, the effective working current IC ≤ 2 &micro;A
Residual Flow IPE ≤ 4 &micro;A
Nominal discharge current In(8/20) & micro;s (core-core) 250 A
Rated discharge current In(8/20)& micro;s (core-ground) 5 kA
pulse discharge current Iimp(350) & micro;s (core-ground) 500 A
2 kA (total)
Total discharge current ITotal(8/20) &micro;s 20 kA
Maximum discharge current Imax(8/20) & micro;s (core-core) 250 A
Maximum discharge current Imax(8/20) & micro;s (core-ground) 10 kA
20 kA (total)
rated power pulse current lan (1000)& micro;s (core-core) 50 A
rated power pulse current lan (1000)& micro;s (core-ground) 50 A
200 A (total)
Output voltage limit 1 kV/& micro;s (core-to-core) peak ≤ 60V
2810492

Phoenix LIT 4-24-Surge Protector 2804678

Product Center

PRODUCT CENTER