Phoenix ELR DCR-PT-24DC-10-reversing load relay 1291655, electronic reversing load relay, used to control DC motors, with LED display and protection circuit, output: 24V DC/10 A, switching time: 5 ms
| Product Type | solid state contactor |
| Product Series | CONTACTRON |
| Mode of operation | 100% operating factor |
| MTTF | 244 years (= 20°C) |
| insulation characteristics: electrical clearance and creepage distance between power supply circuits | |
| insulation | Foundation Isolation |
| phase number | 1 |
| Switching frequency | ≤ 10Hz |
| Main Power Type | single phase |
| test voltage (input/output) | 2.5 kVrms(50 Hz, 60 s) |
| Switching frequency | ≤ 10Hz |
| insulation characteristics | |
| Rated insulation voltage | 50V |
| Rated overvoltage | 800V |
| Overvoltage Level | III |
| pollution level | 2 |
| Electrical clearance and creepage distance between power supply circuits | Foundation Isolation |
| Enter Name | DC input |
| Rated control circuit supply voltage US | 24V DC |
| Control Supply Voltage Range | 11V DC ... 30V DC |
| protection circuit | Surge Protection |
| control | |
| Enter Name | Control Input Right/Left |
| power consumption | 3 mA |
| Rated operating voltage UC | 24V DC |
| Trigger voltage range | 19.2V DC ... 28.8V DC |
| Rated operating current IC | < 2 mA |
| protection circuit | polarity protection |
| Surge Protection | |
| overvoltage protection | > 33V DC |
| switching time RL/LL(open time) | 5 ms |
| DC output | |
| Rated operating voltage Ue | 24V DC |
| Operating voltage range | 11V DC ... 30V DC |
| Rated operating current (DC-13/load output) | 10 A (see attenuation curve) |
| quiescent current | 14 mA |
| short-circuit current | 100 A |
| protection circuit | polarity protection |
| Surge Protection | |
| overvoltage protection | > 33V DC |
| Current limit at short circuit | 75 A |
| control loop | |
| Connection Mode | in-line connection |
| stripping length | 10mm |
| Rigid conductor cross section | 0.14 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.14 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 26 ... 14 |
| Load Circuit | |
| Connection Mode | in-line connection |
| stripping length | 10mm |
| Rigid conductor cross section | 0.14 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.14 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 26 ... 14 |
| Status Display | LED (yellow) |
| Operating voltage display | Green LED |
| error indication | Red LED |