Phoenix PLT-T3-IT-230-P-3 class surge protector-plug 2906451, spare plug, used to protect IT system equipment of PLUGTRAB product series, nominal voltage 230V

Product Type Spare Plug
IEC power supply system IT
type needle type
insulation characteristics
Overvoltage Category III
pollution level 2
IEC Category III
T3
EN Type T3
Ports One

Connection Mode pluggable

Dimensional drawing
width 17.7mm
height 45mm
depth 52mm

color black (RAL 9005)
flame retardant rating, according to UL 94 V-0
material 600
insulation material PA 6.6
Shell Material PA 6.6

protection channel L-L
L-PE
movement direction 1L-N & N-PE
Rated voltage UN 230V AC (IT)
Rated frequency fN 50Hz (60 Hz)
Maximum continuous operating voltage UC(L-L) 275V AC
Maximum continuous operating voltage UC(L-N) 275V AC
Maximum continuous operating voltage UC(L-PE) 440V AC
Rated load current IL 16 A (60 °C)
Residual Flow IPE ≤ 1 µA
Standby power consumption PC ≤ 340 mVA
Reference test voltage UREF 255V AC
Nominal discharge current In(8/20)µs 3 kA
Maximum discharge current Imax(8/20) µs 8 kA
Combined surge UOC 6 kV
voltage protection level Up(L-L) ≤ 1.2 kV
voltage protection level Up(L-N) ≤ 1.2 kV
voltage protection level Up(L-PE) ≤ 1.5 kV
lamax,(L-PE) ≤ 1 kV (1 kA)
≤ 1.5 kV (UOC)
UT(L-PE) 440V AC (120 min/tolerance mode)
1455V AC (200 ms/safety failure mode)
response time tA(L-N) ≤ 25 ns
response time tA(L-PEN) ≤ 100 ns
16 A (MCB B)
Rated short-circuit current ISCCR 1.5 kA AC
maximum spare fuse with branch wiring 16 A (MCB B)

environmental conditions
protection level IP20
ambient temperature (operation) -40°C ... 70°C
ambient temperature (storage/transport) -40°C ... 70°C
elevation ≤ 2000 m (amsl)
Allowable humidity (operating) 5%... 95%

Standards/Specifications IEC 61643-11
Considerations 2011
Standards/Specifications EN 61643-11
Considerations 2012
2838254

Phoenix PLT-T3-IT-230-P-3 class surge protector-plug 2906451

Product Center

PRODUCT CENTER