Phoenix CB E1 24DC/1A S-C P-electronic equipment circuit breaker 2800922, electronic equipment protection switch, 1 position, active current limit, output and control input status, plug for the base.
Product Type
Equipment circuit breaker
Product Series
CB E
type
needle type
Bits
1
Channels
1
insulation characteristics
pollution level
2
Electrical characteristics
Overview
Nominal operating voltage
24V DC
18V DC ... 30V DC
Rated current IN
1 A
Rated overvoltage
0.5 kV
Breaking method
E (Electronic)
required spare fuse
not required, built-in intrinsic safety components
dielectric strength
30V DC max (load circuit)
Active Current Limit
type 1.25 x IN
Fuse
electronic
closed-circuit current I0
Typical 8 mA (when switched on)
Typical 11 mA (with status output)
power consumption
0.4W (normal operation)
temperature attenuation
1 A (at 50°C)
MTBF (IEC 61709, SN 29500)
8320000 h (at 80% load at 25°C)
7410000 h (at 40°C, 80% load)
voltage drop
140 mV (IN )
fail-safe components
2 A DC
Contact Type
without electrical isolation
Load Circuit
Downtime
800 ms (see time/current characteristic curve)
undervoltage shutdown
< 14V (type off)
> 17V (type on)
Maximum capacitive load
20000 µF
impact suppression
Typical 2 ms
auxiliary contact
Contact Type
Positive switch signal output
Status Output
output voltage
24V DC
output current
Maximum 0.2 A (short-circuit protection)
connection data
Connection Mode
pluggable
Dimensions
Dimensional drawing
width
12.3mm
height
45mm
depth
52mm
full module width
12.3mm
Full module height
90mm
full module depth
77.3mm
Material Specifications
color
gray (RAL 7042)
black (RAL 9005)
flame retardant rating to UL 94
V-0
environment and real conditions
environmental conditions
protection level
IP30 (operating area)
ambient temperature (operation)
-25°C ... 50°C (non-condensing)
ambient temperature (storage/transport)
-40°C ... 70°C
Humidity determination
96 h,95 % RH,40 °C
vibration (operation)
3g (according to IEC 60068-2-6, test Fc)
certification
UL certification
identification
UL Listed UL 508
UL Recognized UL 2367
Shipbuilding Licensing
identification
DNV GL
Standards and Specifications
Standard Identification
EMV
Standards/Specifications
EN 61000-6-3
Considerations
noise interference
Standard Identification
EMV
Standards/Specifications
EN 61000-6-2
