ꄴPrevious： Phoenix RIF-1-RPT-LV-24AC/2X21-Relay Module 2903333
ꄲNext： Phoenix RIF-1-RPT-LV-230AC/2X21AU-Relay Module 2903327

Phoenix RIF-1-RPT-LV-230AC/2X21MS-Relay Module 2905292, a prefabricated relay module with in-line connection, including: relay base, relay fixing bracket, plug-in display/interference suppression module, and power contact with test button and built-in status LED Relay. Contact switching type: 2 changeover contacts. Input voltage: 230V AC

Product Type Relay Module
Product Series RIFLINE complete
Application General
Handheld Switch
Mode of operation 100% operating factor
mechanical life about 5 x 106times
insulation characteristics
insulation input and output
changeover contacts
Overvoltage Category III
pollution level 2
Data Management Status
Last data maintenance date 20.03.2025

service life, electrical See Graph
rated conditions 0.81W
test voltage (coil/contact) 4 kVrms(50Hz,1 min, coil/contact)
test voltage (changeover contact/changeover contact) 2.5 kVrms(50Hz,1 minute, changeover contact/changeover contact)
Rated insulation voltage 250V AC
Rated overvoltage 6 kV (input/output)
4 kV (between changeover contacts)

coil side
Rated input voltage UN 230V AC (50/60 Hz)
Input Voltage Range 184V AC ... 253V AC (20 °C)
to UNas reference See Graph
mains frequency 50/60Hz
drives and functions monostable
drive (polarity) polarization
UN 3.5 mA
Typical Response Time 4 ms ... 10 ms
Typical Release Time Range 3 ms ... 20 ms
coil voltage 230V AC
protection circuit varistor
Operating voltage display yellow LED

switching
Contact Type 2 changeover contacts
Switch Contact Type Single contact
Contact Material AgNi
maximum switching voltage 250V AC/DC
Minimum Switching Voltage 12V (10 mA)
limit continuous current 5 A (see graph)
Maximum impact current 16 A (20 ms, normally open contact)
minimum switching current 10 mA (12 V)
Maximum power rating (resistive load) 192W (24V DC)
62W (available for 48V DC)
42W (available for 60V DC)
55W (available for 110V DC)
66W (available for 220V DC)
2000 VA (available for 250V AC)
Minimum on-off capacity 120 mW
Use Class CB Scheme (IEC 60947-5-1) AC15, 1.5 A/250V (N/O contact)
DC13, 1 A/24V (N/O contact)

Connection Mode in-line connection
stripping length 8mm
Rigid conductor cross section 0.14 mm² ... 1.5 mm²
Flexible Wire Cross Section 0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (cold press head with plastic sleeve)
0.14 mm² ... 1 mm² (sleeve with plastic insulating sleeve, two wires on the two-position terminal)
Attachable Guide Cross Section AWG 26 ... 16 (rigid)
26 ... 16 (flexible)

Product Size
width 16mm
height 96mm
depth 75mm
2903334
넳 넲

Phoenix RIF-1-RPT-LV-230AC/2X21MS-Relay Module 2905292

Product Center

PRODUCT CENTER

▼