Phoenix RIF-2-RPT-LV-230AC/2X21-Relay Module 2903310, a prefabricated relay module with in-line connection, including: relay base, power contact relay, plug-in display/interference suppression module and fixed bracket. Contact switching type: 2 changeover contacts. Input voltage: 230V AC
| Product Type | Relay Module |
| product series | RIFLINE complete |
| Application | General |
| Mode of operation | 100% operating factor |
| mechanical life | about 2x 107times |
| insulation characteristics | |
| insulation | Foundation Isolation |
| Overvoltage Category | III |
| pollution level | 2 (rated voltage 230/400V) |
| Data Management Status | |
| Last data maintenance date | 20.03.2025 |
| rated conditions | 1.5W |
| test voltage (coil/contact) | 2.5 kVrms(50Hz,1 min, coil/contact) |
| test voltage (contact/contact) | 2.5 kVrms(50Hz,1 min, contact/contact) |
| Rated insulation voltage | 250V AC |
| Rated overvoltage | 4 kV |
| coil side | |
| Rated input voltage UN | 230V AC |
| Input Voltage Range | 184V AC ... 276V AC (20 °C) |
| to UNas reference | See Graph |
| mains frequency | 50/60Hz |
| drives and functions | monostable |
| drive (polarity) | polarization |
| UN | 6.5 mA |
| Typical Response Time | 5 ms ... 15 ms |
| Typical Release Time Range | 5 ms ... 20 ms |
| coil voltage | 230V AC |
| protection circuit | varistor |
| Operating voltage display | yellow LED |
| switching | |
| Contact Type | 2 changeover contacts |
| Switch Contact Type | single contact |
| Contact Material | AgNi |
| maximum switching voltage | 250V AC/DC |
| Minimum Switching Voltage | 5V (24 mA) |
| limit continuous current | 8.5 A (see graph) |
| Maximum impact current | 30 A (20 ms, normally open contact) |
| minimum switching current | 5 mA (24 V) |
| Maximum power rating (resistive load) | 204W (24V DC) |
| 124W (available for 48V DC) | |
| 108W (available for 60V DC) | |
| 52W (available for 110V DC) | |
| 48W (available for 220V DC) | |
| 2125 VA (available for 250V AC) | |
| switch capacity | 2 A (24V, DC13) |
| 0.22 A (120V, DC13) | |
| 0.11 A (250V, DC13) | |
| 3 A (120V, AC15) | |
| 1.5 A (240V, AC15) | |
| Connection Mode | in-line connection |
| stripping length | 8mm |
| Rigid conductor cross section | 0.14 mm² ... 1.5 mm² |
| Flexible Wire Cross Section | 0.14 mm² ... 1.5 mm² |
| 0.14 mm² ... 1.5 mm² (cold press head with plastic sleeve) | |
| 0.14 mm² ... 1 mm² (sleeve with plastic insulating sleeve, two wires on the two-position terminal) | |
| Connectable Guide Cross Section AWG | 26 ... 16 (rigid) |
| 26 ... 16 (flexible) |
| Product Size | |
| width | 31mm |
| height | 96mm |
| depth | 75mm |
| Drilling | |
| diameter | 3.2mm |
| color | gray (RAL 7042) |
| flame retardant rating, according to UL 94 | V2 (Enclosure) |
Phoenix RIF-2-RPT-LV-230AC/2X21-Relay Module 2903310
