Phoenix DT-TELE-SHDSL-surge protector 2801593, with surge protection connection plug, suitable for two SHDSL telecommunications interfaces (ports). Connection: RJ45(RJ12/RJ11) and plug-in screw connector (COMBICON). Alternatively, it can be attached to the DIN rail.
| Product Type | Information Technology |
| Product Series | DATATRAB |
| IEC Category | B2 |
| C1 | |
| C2 | |
| C3 | |
| D1 | |
| VDE requirement level | B2 |
| C1 | |
| C2 | |
| C3 | |
| D1 | |
| type | adapter for DIN rail mounting |
| Bits | 4 |
| line pairs per module | 2 |
| Connection Mode | RJ45 / COMBICON |
| thread | M2 |
| Tightening torque | 0.22 Nm |
| Flexible Wire Cross Section | 0.14 mm² ... 1.5 mm² |
| Rigid conductor cross section | 0.14 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG | 28 ... 16 |
| Dimensional drawing | |
| width | 25mm |
| height | 103mm |
| depth | 63mm |
| color | silver |
| black (RAL 9005) | |
| Shell Material | zinc die casting |
| Mechanical parameters | |
| Open Side Panel | No |
| movement direction | Line-Line & Line-Ground/Shield |
| Maximum continuous voltage Uc | 185V DC |
| 130V AC | |
| Rated current | ≤ 380 mA (25 °C) |
| UC, the effective working current IC | ≤ 6 µA |
| Residual Flow IPE | ≤ 4 µA |
| Nominal discharge current In(8/20) & micro;s (core-core) | ≤ 5 kA |
| Rated discharge current In(8/20)& micro;s (core-ground) | ≤ 5 kA |
| pulse discharge current Iimp(10/350) µs | 2.5 kA (type D1 pulse number) |
| Total discharge current ITotal(8/20) µs | 10 kA |
| rated power pulse current lan (1000)& micro;s (core-core) | 100 A |
| rated power pulse current lan (1000)& micro;s (core-ground) | 100 A |
| rated power pulse current lan (700)& micro;s (core-core) | 150 A |
| rated power pulse current lan (700)& micro;s (core-ground) | 150 A |
| voltage protection level Up(core-core) | 250V (B2 - 100 A) |
| ≤ 250V (C1 - 500 A) | |
| ≤ 410V (C2 - 5 kA) | |
| ≤ 250V (C3 - 100 A) | |
| voltage protection level Up(line-ground) | ≤ 580V (B2 - 100 A) |
| ≤ 580V (C1 - 500 A) | |
| ≤ 790V (C2 - 5 kA) | |
| ≤ 300V (C3 - 100 A) | |
| response time tA(core-core) | ≤ 100 ns |
| response time tA (core-ground) | ≤ 100 ns |
| input attenuation AE, symmetric. | Typical 0.3 dB (≤ 2.8 MHz / 100 Ω) |
| Typical 3 dB (≤ 25 MHz / 100 Ω) | |
| cut-off frequency fg(3 dB),100 Ω symmetric system | 25 MHz |
| capacitance (core-core) | 55 pF |
| capacitance (core-ground) | 7 pF |
| the resistance of each path | 3.3 Ω 20% |
| Surge protection fault alarm | None |
| Impact tolerance (line-line) | C1 - 1 kV / 500 A |
| C2 - 10 kV / 5 kA | |
| B2 - 4 kV / 100 A | |
| Impact resistance (line-ground) | B2 - 4 kV / 100 A |
| C1 - 1 kV / 500 A | |
| C2 - 10 kV / 5 kA | |
| D1 - 1 kA |
Phoenix DT-TELE-SHDSL-Surge Protector 2801593
