Phoenix FL SWITCH 1104NT-SFP-Industrial Ethernet Switch 1343023, Ultra Thin Ethernet Switch, Wide Temperature Range, 4 RJ45 Ports, 1 SFP Port, All Port Rates Reach 10/100/1000 Mbps, Automatic Data Transmission Speed Detection, Automatic Cross Function and QoS Function

width 22.5mm
height 123mm
depth 90mm

Application Description
Application Description for industrial applications only
Use Restrictions
EMC Description EMC: Class A products, see the manufacturer's declaration in the download area

Shell Material fiber reinforced polycarbonate
aluminum/steel plate DC01

Installation Type DIN rail mounting

Ethernet (RJ45)
interfaces 4
Connection Mode RJ45
Connection Method Considerations Adaptive and Self-Crossover
transmission speed 10/100/1000 Mbps
transmission principle Ethernet RJ45 Twisted Pair
transmission length 100 m (per segment)
signal LED data reception, link status
Channels 4 (RJ45 port)
Ethernet (SFP)
interfaces 1
Connection Mode SFP
transmission speed 100/1000 Mbps (full duplex)
transmission principle depends on SFP module
transmission length up to 40 km (depending on fiber/SFP module used)
signal LED data reception, link status
Channels 1 (SFP port)

Product Type Switch
Product Series Unmanaged Switch 1000
MTTF 87.5 years (MIL-HDBK-217F standard, temperature 25°C, duty cycle 100%)
1071.9 years (SN 29500 standard, temperature 25°C, duty cycle 21%)
839.8 years (Telcordia standard, temperature 25°C,21% operation cycle (5 days a week, 8 hours a day))
special nature extended temperature range
Switch Features
basic functions Unmanaged Switches
adaptive
store and forward switching mode
MAC Address Table 4k
Diagnostics and Status Indicators LED: US, connection and activity per port
Other Functions 100 BASE-TX/100BASE-FX (IEEE 802.3u)
Jumbo Frames (up to 9,216 bytes)
Quality of Service (QoS) Prioritization (IEEE 802.1p)
Energy Efficient Ethernet (IEEE 802.3az)
Gigabit Ethernet 1000BASE-T (IEEE 802.3AB)
10Base-T (IEEE 802.3)
safety function
basic functions Unmanaged Switches
adaptive
store and forward switching mode

rated conditions 3.825W (24V DC)
transmission medium copper cable
power supply
supply voltage (DC) 24V
supply voltage (AC) 24V AC (50/60 Hz)
Supply Voltage Range 9V DC ... 32V DC
18V AC ... 30V AC (50/60 Hz)
Connect power supply Through the COMBICON, the maximum cross section of the wire that can be connected is 2.5 mm²
residual wave 3.6VPP(within the allowable voltage range)
Maximum current consumption 425 mA (for 9V DC)
Typical current consumption 47 mA (24V DC)
1085039

Phoenix FL SWITCH 1104NT-SFP-Industrial Ethernet Switch 1343023

Product Center

PRODUCT CENTER