Phoenix EMG 22-REL/KSR- 24/21AU-Relay module 2947721, relay module, with solid-state miniature electromagnetic relay, contact (AgNi Au): small to large load, 1PDT, input voltage 24VAC/DC
Product Type
Relay Module
product series
EMG
Application
General
Mode of operation
100% operating factor
mechanical life
approx. 3x 107times
insulation characteristics
insulation
Foundation Isolation
Safe isolation, reinforced insulation and 6 kV between input circuit and output contact current paths
Overvoltage Category
III
pollution level
2
Data Management Status
Last data maintenance date
19.03.2025
rated conditions
0.43W
test voltage (coil/contact)
5 kVrms(50Hz,1 min, coil/contact)
test voltage (contact/contact)
1 kV AC (50Hz,1 minute, contact/contact)
Rated insulation voltage
260V AC
coil side
Rated input voltage UN
24V AC/DC
Input Voltage Range
19.2V AC/DC ... 26.4V AC/DC (20 °C)
drives and functions
monostable
drive (polarity)
polarization
UN
18 mA
Typical Response Time
8 ms
Typical release time
10 ms
protection circuit
bridge rectifier
Operating voltage display
yellow LED
switching
Contact Type
1 changeover contact
Switch Contact Type
single contact
Contact Material
AgNi, hard gold plating
maximum switching voltage
30V AC
36V DC
limit continuous current
50 mA
Maximum impact current
50 mA
Maximum power rating (resistive load)
1.2W (24V DC)
switching: when the gold plating layer is destroyed
Considerations
If the gold plating is damaged, the following values are applicable.
