Phoenix STEP3-DIODE/5-24DC/2X5/1X10/PT-Redundant module 1283937, redundant module STEP DIODE, DIN rail mounting, 5V DC ... 24V DC, 1x 10 A, 2x 5 A
| Rated input voltage range | 5V DC ... 24V DC |
| Input Voltage Range | 4.5V DC ... 30V DC |
| Supply Voltage | DC |
| Rated input current (IN) | 1x 10 A |
| 2x 5 A | |
| prevents polarity reversal | <is 60V DC |
| voltage drop, input/output | typical 0.5V (IOUT= 5 A) |
| Transient overvoltage protection | Transil diode |
| Rated output voltage | 24V DC |
| output voltage (USet) setting range | 5V DC ... 24V DC |
| Rated output current (IN) | 2x 5 A |
| 1x 10 A | |
| Attenuation | 50°C ... 70°C (2 % / K) |
| Wire Connection | |
| Connection Mode | in-line connection |
| Rigidity | 0.2 mm² ... 2.5 mm² |
| flexibility | 0.2 mm² ... 2.5 mm² |
| flexible strip cold press head without plastic sleeve | 0.5 mm² ... 1.5 mm² |
| 1 mm² (recommend) | |
| flexible strip cold press head with plastic sleeve | 0.2 mm² ... 1 mm² |
| 1 mm² (recommend) | |
| AWG | 24 ... 14 (Cu) |
| stripping length | 10 mm (rigid/flexible/cold press head without plastic sleeve) |
| 13 mm (cold press head with plastic sleeve) | |
| Wire Connection | |
| Connection Mode | in-line connection |
| Rigidity | 0.2 mm² ... 2.5 mm² |
| flexibility | 0.2 mm² ... 2.5 mm² |
| flexible strip cold press head without plastic sleeve | 0.5 mm² ... 1.5 mm² |
| 1 mm² (recommend) | |
| flexible strip cold press head with plastic sleeve | 0.2 mm² ... 1 mm² |
| 1 mm² (recommend) | |
| AWG | 24 ... 14 (Cu) |
| stripping length | 10 mm (rigid/flexible/cold press head without plastic sleeve) |
| 13 mm (cold press head with plastic sleeve) | |
| insulation voltage input/output | 550V AC |
| insulation voltage input/output/housing | 550V AC |
| Product Type | Redundancy Module |
| product series | STEP DIODE |
| MTBF (IEC 61709, SN 29500) | > 29675000 h (25 °C) |
| > 18693000 h (40 °C) | |
| > 13996000 h (50 °C) | |
| LED | is |
| insulation characteristics | |
| protection level | III |
| pollution level | 2 |
| Product Size | |
| width | 18mm |
| height | 90mm |
| depth | 61mm |
| depth (equipment depth (DIN rail installation)) | 55 mm (equipment depth (DIN rail mounting)) |
| Dimensional drawing | |
| Horizontal stitch pitch | 1 partition (DIN 43880) |
| Installation dimensions | |
| Left/right installation distance | 0mm / 0mm |
| Top/bottom installation distance | 30mm / 30mm |
| Installation Type | DIN rail mounting |
| Assembly Instructions | can be installed side by side: horizontal spacing 0mm, vertical spacing 30mm |
| Installation position | Horizontal DIN rail NS35,EN60715 |
Phoenix STEP3-DIODE/5-24DC/2X5/1X10/PT-Redundant Module 1283937
