Phoenix VAL-MS 230 - 2 surge protector 2839127, surge protector, with base and protective plug with high-power varistor, installed on NS 35/7.5 rail, rated voltage: 230V AC, single channel.

Product Type surge protector
Product Series VALVETRAB MS
IEC Category II
T2
EN Type T2
IEC power supply system TN
TT
type DIN rail module, split, detachable
Bits 1
Surge protection fault alarm with visual status indication window
insulation characteristics
Overvoltage Category III
pollution level 2

Rated frequency fN 50Hz (60 Hz)

Connection Mode screw connection
thread M5
Tightening torque 3 Nm (1.5 mm² ... 16 mm²)
4.5 Nm (25 mm² ... 35 mm²)
stripping length 16mm
Flexible Wire Cross Section 1.5 mm² ... 25 mm²
Rigid conductor cross section 1.5 mm² ... 35 mm²
Attachable Guide Cross Section AWG 15 ... 2
Connection Mode fork cable end
Flexible Wire Cross Section 1.5 mm² ... 16 mm²

Dimensional drawing
width 17.6mm
height 89.8mm
depth 65.7mm (7.5mm with DIN rail)
Horizontal stitch pitch 1 Partition

color black (RAL 9005)
flame retardant rating to UL 94 V-0
material 600
insulation material PA 6.6/PBT
Material Group I
Shell Material PA 6.6
PBT

protection channel L-N
L-PEN
movement direction 1L-N/PE
Rated voltage UN 240/415V AC (TN)
240/415V AC (TT)
Rated frequency fN 50Hz (60 Hz)
Maximum continuous operating voltage UC 275V AC
Rated load current IL 80 A
Residual Flow IPE ≤ 0.45 mA
Standby power consumption PC ≤ 120 mVA
Nominal discharge current In(8/20)µs 20 kA
Maximum discharge current Imax(8/20) µs 40 kA
Rated short-circuit current ISCCR 25 kA
voltage protection level Up ≤ 1.35 kV
Residual pressure Ures ≤ 1.35 kV (In)
≤ 1.1 kV (10 kA)
≤ 1 kV (at 5 kA)
≤ 0.9 kV (at 3 kA)
UT 335V AC (5 seconds/withstand mode)
440V AC (120 min/safe failure mode)
response time tA ≤ 25 ns
maximum spare fuse with V-connection 80 A (gG)
2817974

Phoenix VAL-MS 230 - 2 class surge protector 2839127

Product Center

PRODUCT CENTER