Phoenix SACCBP-M12FS-8CON-M16/1,0-940-Equipment connector board rear installation 1553378, equipment connector board rear installation, 8-position, PUR, aqua RAL 5021, hole type, straight head, M12, code: A, free outlet with end, board rear installation, M16 x 1.5, cable connection, cable length: 1 m, 0.14 mm2, Ethernet, alternative product complies with RoHS II non-exempt 6c (Pb < 0.1 %) product number: 1240031
| Installation Type |
plate rear mount M16 x 1.5 with flat nut |
| Assembly Instructions |
with flat nut |
| Product Type |
Circular Connector (Equipment Side) |
| Bits |
8 |
| Outlet No. |
1 |
| Shielding |
have |
| coding |
A |
| thread type |
M12 |
| insulation characteristics |
| Overvoltage Category |
II |
| pollution level |
3 |
| flame retardant rating, according to UL 94 |
V0 |
| sealing material |
FKM |
| Contact Material |
CuZn |
| Material Contact Surface |
Ni/Au |
| Contact Carrier Material |
PA 6.6 |
| screw connection material |
zinc cast, nickel plated |
| outer sheath, material |
PUR |
| Wire Material |
copper stranded wire |
| contact resistance |
≤ 3 mΩ |
| insulation resistance |
≥ 100 MΩ |
| Rated voltage UN |
48V AC |
| 60V DC |
| Rated current IN |
2 A |
| transmission characteristics (category) |
CAT5 (IEC 11801:2002) |
| wave impedance |
100 Ω |
| Maximum conductor resistance |
150 mΩ/m |
| Wire Connection |
| Connection Mode |
cable connection |
| Contact Type |
hole plug |
| Wire Cross Section |
0.14 mm² |
| connection 1 |
| Socket Design |
hole type |
| socket |
straight head |
| socket thread type |
M12 |
| coding |
A |
| Connection 2 |
| Socket Design |
end |
