ꄴPrevious： Phoenix TRIO-PS/3AC/24DC/10-Power 2866459
ꄲNext： Phoenix TRIO-PS/1AC/24DC/ 2.5-Power 2866268

Phoenix TRIO-PS/1AC/5DC/10-power supply 2902646, TRIO POWER power supply for DIN rail installation, primary switching mode, input: 1 phase, output: 5V DC/10 A

Rated input voltage range 100V AC ... 240V AC
Input Voltage Range 85V AC ... 264V AC (attenuation <90V AC:2.5 %/K)
Attenuation < 90V AC (2.5 %/V)
AC input voltage range 85V AC ... 264V AC (attenuation <90V AC:2.5 %/K)
maximum dielectric strength 300V AC
Supply Voltage AC
Impulse current < 30 A
impulse current integral (I2t) < 1.9 A2s
AC frequency range 45Hz ... 65Hz
grid buffer time > 40 ms (120V AC)
> 180 ms (230V AC)
power consumption 1 A (120V AC)
0.5 A (230V AC)
Rated power consumption 131.4 VA
protection circuit transient surge protection; varistor
power factor (cos phi) 0.48
Typical Response Time < 1 s
Allowable Spare Fuses B6 B10 B16
recommend use 6 A ... 16 A (characteristics B, C, D, K)
PE discharge current < 3.5 mA

efficiency > 80 % (230V AC)
output characteristics U/ I
Rated output voltage 5V DC ±1%
output voltage (USet) setting range 4.5V DC ... 6V DC (> 12V DC, limited stable capacity)
Rated output current (IN) 10 A (-25°C ... 55 °C)
Attenuation 55°C ... 70°C (2.5 %/K)
feedback voltage resistance about 9V DC
output < 9V DC
Maximum capacitive load Unlimited
Active Current Limit approx. 12A (in case of short circuit)
control deviation <1% (load change, static 10%... 90%)
<2% (change of load, dynamic 10%... 90%)
< 0.1 % (input voltage variation is ± 10 %)
residual wave < 60 mVSS
output power 50W
peak switching voltage rated load < 70 mVSS
maximum no-load power consumption 1.5W
Maximum rated load power loss 13.5W
rise time < 2 ms (UOUT(10%... 90%))
and connect Yes, for redundancy and increased capacity
Concatenation is

Input
Connection Mode screw connection
Minimum cross section of rigid conductor 0.2 mm²
Maximum cross section of rigid conductor 2.5 mm²
Minimum cross section of flexible lead 0.2 mm²
Flexible lead maximum cross section 2.5 mm²
Minimum Wire Cross Section AWG 24
Maximum conductor cross section AWG 14
stripping length 9mm
thread M2,5
Minimum tightening torque 0.4 Nm
Maximum tightening torque 0.5 Nm
Output
Connection Mode screw connection
Minimum cross section of rigid conductor 0.2 mm²
Maximum cross section of rigid conductor 2.5 mm²
Minimum cross section of flexible lead 0.2 mm²
Flexible lead maximum cross section 2.5 mm²
Minimum Wire Cross Section AWG 24
Maximum conductor cross section AWG 14
stripping length 9mm
thread M2,5
Minimum tightening torque 0.4 Nm
Maximum tightening torque 0.5 Nm
2902646
넳 넲

Phoenix TRIO-PS/1AC/5DC/10-Power 2902646

Product Center

PRODUCT CENTER

▼