Phoenix QUINT-ORING/24DC/2X40/1X80-Redundant module 2902879, active QUINT redundant module for DIN rail installation, using ACB (automatic current equalization) technology and monitoring function, input: 24V DC/2x 40 A, output: 24V DC/1 x 80 A, including installed universal DIN rail adapter UTA 107/30
DC operation
Rated input voltage range
24V DC
Input Voltage Range
18V DC ... 28V DC (SELV)
DC input voltage range
18V DC ... 28V DC (SELV)
Supply Voltage
DC
prevents polarity reversal
<is 60V
Rated input current (IN )
2x 40 A (-25°C ... 60 °C)
1x 80 A (-25°C ... 60 °C)
Maximum current Imax
2x 45 A (-25°C ... 40 °C)
1x 90 A (-25°C ... 40 °C)
215 A (12 ms, SFB technology)
Transient overvoltage protection
varistor
voltage drop, input/output
0.2V (IOUT = 80 A)
Output Data
efficiency
> 98%
Rated output voltage
UIn - 0,2V
Rated output current (IN )
80 A (increased power)
40 A (redundant)
Attenuation
60°C ... 70°C (2.5 %/K)
output
≤ 32V DC
Maximum rated load power loss
16W (IOUT = 80 A)
Concatenation
No
signal: redundant OK ,13/14
Output Description
Combination contact
maximum switching voltage
Max. 30V AC/DC
Maximum starting current
≤ 100 mA (short-circuit protection)
signal: ACB (automatic current balance) OK, 23/24
Output Description
contact closure: & Delta; UIN ≤ 300 mV
maximum switching voltage
Max. 30V AC/DC
Maximum starting current
≤ 100 mA (short-circuit protection)
signal
Maximum starting current
≤ 100 mA (short-circuit protection)
connection data
Input
Connection Mode
screw connection
Minimum cross section of rigid conductor
0.5 mm²
Maximum cross section of rigid conductor
16 mm²
flexible lead
0.5 mm²
flexible conductor
16 mm²
Minimum Wire Cross Section AWG
6
stripping length
10mm
thread
M4
Minimum tightening torque
1.2 Nm
Maximum tightening torque
1.5 Nm
Output
Connection Mode
screw connection
Minimum cross section of rigid conductor
0.5 mm²
Maximum cross section of rigid conductor
35 mm²
flexible lead
0.5 mm²
flexible conductor
35 mm²
Minimum Wire Cross Section AWG
2
stripping length
18mm
thread
M5
Minimum tightening torque
2.5 Nm
Maximum tightening torque
4.5 Nm
signal
Connection Mode
screw connection
Minimum cross section of rigid conductor
0.2 mm²
Maximum cross section of rigid conductor
6 mm²
flexible lead
0.2 mm²
flexible conductor
4 mm²
Minimum Wire Cross Section AWG
16
Maximum conductor cross section AWG
10
stripping length
10mm
thread
M3
Minimum tightening torque
0.5 Nm
Maximum tightening torque
0.6 Nm
