Phoenix G 5/4-equipment terminal 2716046, equipment terminal, nominal working voltage: 500V, rated current: 32 A, connection quantity: 8, number of digits: 4, wiring method: screw connection, rated wiring capacity: 4mm2, cross section: 0.2 mm2 -4mm2, installation method: direct screw connection, color: gray
| Product Type |
straight-through terminal |
| product series |
G |
| Bits |
4 |
| connection quantity |
8 |
| Rows |
1 |
| potential |
4 |
| insulation characteristics |
| Overvoltage Category |
III |
| pollution level |
3 |
| Rated surge voltage |
6 kV |
| rated conditions |
1.02W |
| the number of connections per layer |
8 |
| Rated cross section |
4 mm² |
| thread |
M3 |
| Tightening torque |
0.6 ... 0.8 Nm |
| stripping length |
8mm |
| plug gauge |
A3 |
| connection meets standards |
IEC 60947-7-1 |
| Rigid conductor cross section |
0.2 mm² ... 4 mm² |
| cross section AWG |
24 ... 12 (as amended by IEC standards) |
| Flexible Wire Cross Section |
0.2 mm² ... 4 mm² |
| WIRE CROSS SECTION, FLEXIBLE [AWG] |
24 ... 12 (as amended by IEC standards) |
| Flexible conductor cross-section (sleeve without plastic insulation) |
0.25 mm² ... 4 mm² |
| flexible conductor cross-section (sleeve with plastic insulating tube) |
0.25 mm² ... 2.5 mm² |
| 2 wires of the same cross section, rigid wire |
0.2 mm² ... 1.5 mm² |
| 2 wires with the same cross section, flexible wire |
0.2 mm² ... 1.5 mm² |
| 2 wires with the same cross section, flexible, with sleeve but not plastic sleeve |
0.25 mm² ... 1.5 mm² |
| 2 wires with the same cross section, flexible, with TWIN sleeve and plastic sleeve |
0.5 mm² ... 1 mm² |
| Nominal current |
32 A |
| Maximum load current |
32 A (when connecting a conductor with a cross-sectional area of 4 mm²) |
| Rated voltage |
500V |
| Rated cross section |
4 mm² |
| Dimensional drawing |
|
| width |
38mm |
| height |
22mm |
| depth |
24mm |
| aperture |
3.2mm |
| color |
gray (RAL 7042) |
| flame retardant rating, according to UL 94 |
V0 |
| Insulation Material Group |
I |
| insulation material |
PA |
| Application of Static Insulation Materials at Low Temperature |
-60°C |
| insulating materials (DIN EN 60216-1(VDE 0304-21)) |
130°C |
| Insulation Relative Temperature Index (Electrical, UL 746 B) |
130°C |
| railway vehicles (DIN EN 45545-2) R22 |
HL 1 - HL 3 |
| Fire protection of railway vehicles (DIN EN 45545-2) R23 |
HL 1 - HL 3 |
| railway vehicles (DIN EN 45545-2) R24 |
HL 1 - HL 3 |
| Fire protection of railway vehicles (DIN EN 45545-2) R26 |
HL 1 - HL 3 |
| Thermal Release NFPA 130 (ASTM E 1354) |
28 MJ/kg |
| Surface Flammability NFPA 130 (ASTM E 162) |
through |
| Smoke specific optical density NFPA 130 (ASTM E 662) |
through |
| Smoke Toxicity NFPA 130 (SMP 800C) |
through |
