Phoenix QUINT-PS/1AC/24DC/10/CO-power supply, with protective coating 2320911, primary switching power supply QUINT POWER, screw connection, DIN rail installation, SFB Technology (Selective Fuse Breaking), input: 1 phase, Output: 24V DC/10 A
| AC operation |
| Rated input voltage range |
100V AC ... 240V AC -15 % / +10% |
| Input Voltage Range |
85V AC ... 264V AC |
| Attenuation IStat. Boost |
< 100V AC (1 %/V) |
| AC input voltage range |
85V AC ... 264V AC |
| DC input voltage range |
90V DC ... 410V DC +5 % (UL 508: ≤ 300V DC) |
| maximum dielectric strength |
300V AC |
| Supply Voltage |
AC |
| Impulse current |
< 15 A |
| impulse current integral (I2t) |
< 1.5 A2s |
| Surge current limit |
15 A |
| AC frequency range |
45Hz ... 65Hz |
| DC frequency range |
0Hz |
| grid buffer time |
> 36 ms (120V AC) |
| Typical 36 ms (230V AC) |
| power consumption |
4 A (100V AC) |
| 1.7 A (240V AC) |
| Rated power consumption |
303 VA |
| protection circuit |
transient surge protection; varistor, gas discharge tube |
| Typical Response Time |
< 0.15 s |
| input fuse |
10 A (slow fuse, internal) |
| Allowable Spare Fuses |
B10 B16 |
| recommend use |
10 A ... 20 A (characteristics B, C, D, K) |
| PE discharge current |
< 3.5 mA |
| DC operation |
| Rated input voltage range |
110V DC ... 250V DC (UL 508: ≤ 300V DC) |
| Input Voltage Range |
110V DC ... 350V DC |
| Attenuation IStat. Boost |
< 110V DC (1 %/V) |
| power consumption |
3.4 A (110V DC) |
| 1.5 A (250V DC) |
| efficiency |
Typical 92% (120V AC) |
| Typical 93.2 % (230V AC) |
| output characteristics |
U/ I |
| Rated output voltage |
24V DC ±1% |
| output voltage (USet) setting range |
18V DC ... 29.5V DC (> 24V DC, stable capacity limit) |
| Rated output current (IN) |
10 A |
| POWER BOOST (IBoost) |
15 A (-25°C ... 40°C constant, UOUT= 24V DC) |
| Static Boost (IStat.Boost) |
15 A |
| selective fusing (ISFB) |
60 A (12 ms) |
| Type of thermal magnetic circuit breaker |
B2 / B4 / B6 / C2 / C4 |
| Attenuation |
60°C ... 70°C (2.5 %/K) |
| feedback voltage resistance |
≤ 35V DC |
| output |
≤ 32V DC |
| control deviation |
<1% (load change, static 10%... 90%) |
| <2% (change of load, dynamic 10%... 90%) |
| < 0.1 % (input voltage variation is ± 10 %) |
| residual wave |
< 50 mVSS(rated value) |
| output power |
240W |
| 360W |
| maximum no-load power consumption |
9.1W |
| Maximum rated load power loss |
22W |
| rise time |
< 0.05 s (UOUT(10%... 90%)) |
| and connect |
Yes, for redundancy and increased capacity |
| Concatenation |
is |
| signal: DC OK active |
| Output Description |
UOUT>0.9xUN: High Signal |
| Switching voltage range |
18V DC ... 24V DC |
| Maximum starting current |
20 mA (short circuit protection) |
| Continuous load current |
≤ 20 mA |
