Phoenix F-MS 12 ST-2 type surge protector 2817990, type 2 surge protection plug, with N-PE total current spark gap, installed on the base.
| Product Type |
Spare Plug |
| Product Series |
VALVETRAB MS |
| IEC Category |
II |
| T2 |
| EN Type |
T2 |
| IEC power supply system |
TN |
| TT |
| type |
needle type |
| Bits |
1 |
| Surge protection fault alarm |
with visual status indication window |
| can test protectors using the CHECKMASTER software tests: |
|
| insulation characteristics |
| Overvoltage Category |
III |
| pollution level |
2 |
| Rated frequency fN |
50Hz (60 Hz) |
| Connection Mode |
pluggable |
| Dimensional drawing |
|
| width |
17.5mm |
| height |
52.4mm |
| depth |
55.3mm |
| Horizontal stitch pitch |
1 Partition |
| color |
black (RAL 9005) |
| flame retardant rating, according to UL 94 |
V-0 |
| material |
600 |
| insulation material |
PA 6.6 |
| Material Group |
I |
| Shell Material |
PA 6.6 |
| protection channel |
N-PE |
| Direction of action |
N-PE |
| Rated voltage UN |
240/415V AC (TN - only N-PE) |
| 240/415V AC (TT - only N-PE) |
| Rated frequency fN |
50Hz (60 Hz) |
| Maximum continuous voltage Uc |
260V AC |
| Residual Flow IPE |
≤ 5 µA |
| Standby power consumption PC |
≤ 1.5 mVA |
| Nominal discharge current In(8/20)µs |
20 kA |
| Maximum discharge current Imax(8/20) µs |
40 kA |
| Disconnect freewheeling capacity Ifi |
100 A (260 V) |
| voltage protection level Up |
≤ 1.5 kV |
| Residual pressure Ures |
≤ 0.4 kV (In) |
| ≤ 0.25 kV (10 kA) |
| ≤ 0.15 kV (at 5 kA) |
| ≤ 0.1 kV (at 3 kA) |
| 6 kV (1.2/50)& micro;s |
≤ 1.5 kV |
| UT |
1200V AC (200 ms/withstand mode) |
| response time tA |
≤ 100 ns |
| Additional technical data |
| Maximum continuous voltage Uc |
305V AC |
| impulse discharge current (10/350)& micro;s, charging |
1.25 |
| impulse discharge current (10/350)& micro;s, specific energy |
1.56 kJ/Ω |
| impulse discharge current (10/350)& micro;s, peak limp |
2.5 kA (3 x) |
| environmental conditions |
| protection level |
IP20 |
| ambient temperature (operation) |
-40°C ... 80°C |
| ambient temperature (storage/transport) |
-40°C ... 80°C |
| elevation |
≤ 2000 m (amsl) |
| Allowable humidity (operating) |
5%... 95% |
| Impact Force (Operation) |
25g (half sine/11 ms/ 3x ± X,± Y, ± Z) |
| vibration (operation) |
5g (10 ... 500Hz / 2.5 h / X,Y,Z) |
