connection 1 |
Dimensional drawing |
M12 pin connector pinout, 4-pin, D-coded, plug side
|
Model |
M12 plug, straight, 4-position, shielded (Advanced Shielding Technology), anti-wrong code: D |
Bits |
4 |
Shielding |
have |
Shielding |
Advanced Shielding Technology |
Signal Type/Classification |
Ethernet CAT5 (IEC 11801), 100 Mbps |
Insertion/unplugging cycle |
≥ 100 |
insulation resistance |
≥ 100 MΩ |
Overvoltage Level |
II |
pollution level |
3 |
Tightening torque |
0.4 Nm |
Identification material contact |
CuSn |
Identification Material Pin Surface |
Ni/Au |
Identification material insert |
PA 6.6 |
identification material screw connection |
Zinc die-cast, nickel-plated |
Marking material grip |
TPU, high flame retardancy, with self-extinguishing properties |
Identification Material Seals |
FKM |
flame retardant rating, according to UL 94 |
V0 |
protection level |
IP65 |
IP67 |
ambient temperature (operation) |
-25°C ... 85°C |
Standard Identification |
M12 Pin Plug Connector |
Standards/Regulations |
IEC 61076-2-101 |
Connection 2 |
Dimensional drawing |
M12 pin connector pinout, 4-pin, D-coded, plug side
|
Model |
M12 plug, straight, 4-position, shielded (Advanced Shielding Technology), anti-wrong code: D |
Bits |
4 |
Shielding |
have |
Shielding |
Advanced Shielding Technology |
Signal Type/Classification |
Ethernet CAT5 (IEC 11801), 100 Mbps |
Insertion/unplugging cycle |
≥ 100 |
insulation resistance |
≥ 100 MΩ |
Overvoltage Level |
II |
pollution level |
3 |
Tightening torque |
0.4 Nm |
Identification material contact |
CuSn |
Identification Material Pin Surface |
Ni/Au |
Identification material insert |
PA 6.6 |
identification material screw connection |
Zinc die-cast, nickel-plated |
Marking material grip |
TPU, high flame retardancy, with self-extinguishing properties |
Identification Material Seals |
FKM |
flame retardant rating, according to UL 94 |
V0 |
protection level |
IP65 |
IP67 |
ambient temperature (operation) |
-25°C ... 85°C |
Standard Identification |
M12 Pin Plug Connector |
Standards/Regulations |
IEC 61076-2-101 |