Phoenix OV-24DC/480AC/5-Semiconductor relay 2982650, solid state relay, used for signal amplification and isolation in control and load circuits, can be inserted into the base SIM-AMS, or directly soldered to the printed circuit board, input voltage: 4-32V DC, output: 12-530V AC/5A
| Product Type | Single-phase solid-state relay |
| Mode of operation | 100% operating factor |
| insulation characteristics | |
| insulation | Foundation Isolation |
| Data Management Status | |
| Last data maintenance date | 17.05.2024 |
| test voltage (input/output) | 4 kV (50Hz,1 minute, input/output) |
| Rated input voltage UN | 24V DC |
| Input Voltage Range | 4V DC ... 32V DC |
| switch threshold "0" signal, voltage | < 1.2V DC |
| switch threshold "1" signal voltage | > 3.5V DC |
| UN | 10 mA |
| Typical Response Time | ms (max ½ phase) |
| Typical closing time | ms (max ½ phase) |
| sending frequency | 25Hz |
| Digital Output Design | electronic |
| Output Voltage Range | 12V AC ... 530V AC (45/65Hz) |
| limit continuous current | 5 A (see temperature load curve) |
| Minimum Load Current | 20 mA |
| leakage current | < 1 mA |
| surge current | 80 A (tp = 20 ms) |
| minimum phase angle cos phi | 0.5 |
| Maximum load value | 50 A2s |
| peak quiescent voltage | 1000V (periodic peak reverse voltage) |
| Voltage drop at maximum limited continuous current | 1.2V |
| output circuit | 2-wire connection |
| Dimensional drawing | |
| width | 10.5mm |
| height | 43mm |
| depth | 25.4mm |
| color | black (RAL 9005) |
| environmental conditions | |
| ambient temperature (operation) | -20°C ... 70°C |
| ambient temperature (storage/transport) | -20°C ... 70°C |
| UKCA | |
| Certificate | UKCA Compliance |
| Standards/Regulations | EN 61000-4-2 |
| EN 61000-4-3 | |
| EN 61000-4-4 | |
| EN 61000-4-5 | |
| EN 61000-4-6 | |
| EN 55011 |
| Assembly Instructions | arrangement interval> 20mm |
Phoenix OV-24DC/480AC/5-Semiconductor Relay 2982650
